Whether in the wc or in a swimming pool, it from time to time occurs that the Zopo ZP920 is slipped in the water. On the other hand, it’s not simply because a mobile has fallen in the water that it is undoubtedly dead. Certainly, it is feasible to redo an Zopo ZP920 that has fallen in the water. To accomplish this, it is necessary to respect particular steps. People typically have bad reflexes and this is what can deteriorate the Zopo ZP920. We will first discover the methods to be taken after the Zopo ZP920 has fallen into the water. We will discover in the second place the classical mistakes that the majority of people make.
Methods to follow in cases where your Zopo ZP920 fell into the water
If you need to restore your Zopo ZP920 in operating order, we recommend that you follow the steps below.
Do not attempt to turn the Zopo ZP920 back on after exiting the water
One thing to accomplish when the Zopo ZP920 has fallen into the water is to shut off the mobile. Certainly, in cases where it didn’t turn off, turn it off without doing any other manipulation. If it is already off, do not attempt to turn it back on for the moment. If the Zopo ZP920 is started and wet, you can generate a short circuit and consequently toast the mobile.
Remove detachable components
When the Zopo ZP920 is out of the water and turned off, it will have to be disassembled to the highest possible. Meaning that it’ll be necessary to take out the shell, the SIM card, the SD card and the battery if possible. When performed, put all of these things to dry and continue to the next step.
Aspire the water that is in your Zopo ZP920
Using a straw, you need to suck up the water that is contained in your Zopo ZP920. For doing it, you simply have to glue the straw over areas like buttons and vacuum. When you believe you have aspired all the water from your Zopo ZP920, you will have the capacity to start drying it.
Dry the Zopo ZP920
The fourth step is to dry the mobile. For this, we recommend you to put it in front of a ventilator several hours. Prevent using methods that cause the mobile to heat up or damage the mobile. When it is performed, we recommend you to leave the Zopo ZP920 in rice for 24 or 48 hours. The rice will consequently absorb the wetness that stays in the Zopo ZP920.
Reassemble the components and turn on the Zopo ZP920
When you have completed the prior steps, your Zopo ZP920 should be dry. So now you can try to turn on the Zopo ZP920. If perhaps this does not do the job, we recommend you to wait a few days or to bring the Zopo ZP920 to a repairman.
What should not be done in cases where the Zopo ZP920 has fallen into the water
You will find several stuff not to accomplish when your Zopo ZP920 has fallen into the water. The first is to try to turn the mobile back on just after. This can demolish the Zopo ZP920. Following, it is highly recommended not to use a heat source to dry the Zopo ZP920. Certainly, methods which include oven or hair dryer heat the components and may deteriorate them. Finally, to get the water out of the mobile, do not shake it. Certainly, it could as well ruin the Zopo ZP920.
