Whether in the toilet or in a pool, it sometimes happens that the Zopo ZP720 is dropped into the water. Nevertheless, it is not simply because a mobile phone has fallen into the water that it’s inevitably dead. In fact, it is feasible to redo an Zopo ZP720 that has fallen into the water. To achieve this, it is necessary to respect specific actions. People often have bad reflexes and this is what can degrade the Zopo ZP720. We will first of all discover the methods to be taken after the Zopo ZP720 has fallen into the water. We will discover in the 2nd place the classical mistakes that the majority of people make.
Methods to follow in cases where your Zopo ZP720 fell into the water
If perhaps you need to restore your Zopo ZP720 in working order, we advise that you follow the steps below.
Do not attempt to turn the Zopo ZP720 back on after exiting the water
One thing to do when the Zopo ZP720 has fallen into the water is to turn off the mobile phone. In fact, in cases where it didn’t switch off, turn it off without doing any other manipulation. If perhaps it is already off, do not attempt to turn it back on for the moment. If perhaps the Zopo ZP720 is started and wet, you can produce a short circuit and therefore toast the mobile phone.
Remove detachable components
Once the Zopo ZP720 is out of the water and switched off, it will have to be disassembled to the maximum. This means that it will probably be necessary to remove the shell, the SIM card, the SD card and the battery if possible. Once carried out, put all of these things to dry and proceed to the next step.
Aspire the water that is in your Zopo ZP720
By using a straw, you will have to suck up the water that is contained in your Zopo ZP720. For this, you simply need to glue the straw over areas like buttons and vacuum. Once you think you have aspired all the water from your Zopo ZP720, you will have the ability to start drying it.
Dry the Zopo ZP720
The fourth step is to dry the mobile phone. For this, we suggest you to put it in front of a ventilator a number of hours. Avoid using solutions that cause the mobile phone to heat up or damage the mobile phone. Once it is performed, we suggest you to leave the Zopo ZP720 in rice for 24 or 48 hours. The rice will therefore absorb the moisture that stays in the Zopo ZP720.
Reassemble the components and turn on the Zopo ZP720
When you have completed the previous steps, your Zopo ZP720 should be dry. So now you can make an attempt to turn on the Zopo ZP720. If this doesn’t perform, we suggest you to wait some days or to bring the Zopo ZP720 to a repairshop.
What should not be done in cases where the Zopo ZP720 has fallen into the water
There are a number of stuff not to do when ever your Zopo ZP720 has fallen into the water. The first of all is to make an attempt to turn the mobile phone back on just after. This can destroy the Zopo ZP720. Following, it is highly advised not to use a heat source to dry the Zopo ZP720. In fact, solutions such as oven or hair dryer heat the components and may degrade them. At last, to get the water out of the mobile phone, do not shake it. Certainly, it could as well ruin the Zopo ZP720.
