Whether in the wc or in a swimming pool, it occasionally happens that the Zopo ZP590 is slipped into the water. On the other hand, it is not simply because a phone has fallen into the water that it’s inevitably dead. In fact, it is feasible to redo an Zopo ZP590 that has fallen into the water. To do this, it is necessary to respect certain steps. People often have bad reflexes and this is what can damage the Zopo ZP590. We will first discover the techniques to be taken after the Zopo ZP590 has fallen into the water. We will discover in the second place the common mistakes that a good number of people make.
Steps to follow if your Zopo ZP590 fell into the water
Whenever you want to recover your Zopo ZP590 in operating order, we advise that you follow the steps below.
Do not attempt to turn the Zopo ZP590 back on after getting out the water
The first thing to do when the Zopo ZP590 has fallen into the water is to turn off the phone. In fact, if it did not turn off, turn it off without doing any other manipulation. If perhaps it is already off, do not attempt to turn it back on for the moment. If perhaps the Zopo ZP590 is turned on and wet, you could create a short circuit and consequently toast the phone.
Remove detachable components
When the Zopo ZP590 is out of the water and switched off, it will have to be disassembled to the maximum. This implies that it will be necessary to take away the shell, the SIM card, the SD card and the battery if possible. When completed, put all of these things to dry and proceed to the following step.
Aspire the water that is in your Zopo ZP590
Employing a straw, you will need to suck up the water that is contained in your Zopo ZP590. For doing it, you just need to glue the straw over areas like buttons and vacuum. When you think you have aspired all the water from your Zopo ZP590, you will have the ability to start drying it.
Dry the Zopo ZP590
The fourth step is to dry the phone. For this, we advise you to put it in front of a ventilator a number of hours. Avoid using methods that cause the phone to heat up or damage the phone. When it is completed, we advise you to leave the Zopo ZP590 in rice for 24 or 48 hours. The rice will consequently absorb the wetness that stays in the Zopo ZP590.
Reassemble the components and turn on the Zopo ZP590
When you have completed the prior steps, your Zopo ZP590 should be dry. So now you can try to turn on the Zopo ZP590. In the event that this doesn’t work, we advise you to hold out some days or to bring the Zopo ZP590 to a repairshop.
What should not be done if the Zopo ZP590 has fallen into the water
You will find a number of things not to do when your Zopo ZP590 has fallen into the water. The first is to try to turn the phone back on just after. This can kill the Zopo ZP590. Next, it is highly advised not to use a heat source to dry the Zopo ZP590. Certainly, techniques such as oven or hair dryer heat the components and may damage them. Finally, to get the water out of the phone, do not shake it. In fact, it could likewise ruin the Zopo ZP590.
