Whether in the wc or in a pool, it from time to time occurs that the Zopo ZP330 is slipped into the water. Even so, it’s not because a phone has fallen into the water that it is inevitably dead. Certainly, it is feasible to redo an Zopo ZP330 that has fallen into the water. To accomplish this, it is needed to respect particular steps. People frequently have bad reflexes and this is what can degrade the Zopo ZP330. We will 1st discover the techniques to be taken after the Zopo ZP330 has fallen into the water. We will discover in the secondary place the common errors that most people make.
Steps to follow if perhaps your Zopo ZP330 fell into the water
If perhaps you wish to restore your Zopo ZP330 in working order, we highly recommend that you follow the steps below.
Do not try to turn the Zopo ZP330 back on after exiting the water
One thing to do when the Zopo ZP330 has fallen into the water is to switch off the phone. Certainly, if perhaps it didn’t switch off, turn it off without doing any other manipulation. In the event that it is already off, do not try to turn it back on for the moment. In the event that the Zopo ZP330 is started and wet, you may create a short circuit and consequently toast the phone.
Remove detachable components
Once the Zopo ZP330 is out of the water and turned off, it will have to be disassembled to the highest possible. This means that it will probably be needed to take away the shell, the SIM card, the SD card and the battery if possible. Once carried out, put all of these things to dry and proceed to the following step.
Aspire the water that is in your Zopo ZP330
Employing a straw, you must suck up the water that is contained in your Zopo ZP330. For doing it, you merely need to glue the straw over areas like buttons and vacuum. Once you think you have aspired all the water from your Zopo ZP330, you will have the ability to start drying it.
Dry the Zopo ZP330
The fourth step is to dry the phone. For this, we recommend you to put it in front of a ventilator several hours. Prevent using techniques that cause the phone to heat up or damage the phone. Once it is finished, we recommend you to leave the Zopo ZP330 in rice for 24 or 48 hours. The rice will consequently absorb the wetness that remains in the Zopo ZP330.
Reassemble the components and turn on the Zopo ZP330
When you have completed the prior steps, your Zopo ZP330 should be dry. So now you can make an attempt to turn on the Zopo ZP330. If this does not function, we recommend you to hang on some days or to bring the Zopo ZP330 to a repairman.
What should not be done if perhaps the Zopo ZP330 has fallen into the water
You will find several things not to do when your Zopo ZP330 has fallen into the water. The 1st is to make an attempt to turn the phone back on just after. This can kill the Zopo ZP330. Following, it is highly recommended not to use a heat source to dry the Zopo ZP330. Certainly, methods such as oven or hair dryer heat the components and may degrade them. Finally, to get the water out of the phone, do not shake it. In fact, it could likewise ruin the Zopo ZP330.
