How to fix a water damaged on Zopo Speed 8

Whether in the wc or in a pool, it from time to time happens that the Zopo Speed 8 is dropped into the water. On the other hand, it is not simply because a phone has fallen into the water that it is unavoidably dead. Certainly, it is possible to redo an Zopo Speed 8 that has fallen into the water. To accomplish this, it is important to respect certain steps. People frequently have bad reflexes and this is what can damage the Zopo Speed 8. We will 1st see the steps to be taken after the Zopo Speed 8 has fallen into the water. We will see in the secondary place the common errors that a large number of people make.water-damaged-Zopo-Speed-8

Steps to follow in cases where your Zopo Speed 8 fell into the water

If perhaps you need to recover your Zopo Speed 8 in working order, we recommend that you follow the steps below.

Do not try to turn the Zopo Speed 8 back on after exiting the water

The first thing to accomplish when the Zopo Speed 8 has fallen into the water is to switch off the phone. Certainly, in cases where it didn’t turn off, turn it off without doing any other manipulation. If perhaps it is already off, do not try to turn it back on for the moment. If perhaps the Zopo Speed 8 is started and wet, you may make a short circuit and as a result toast the phone.

Remove detachable components

When the Zopo Speed 8 is out of the water and turned off, it will have to be disassembled to the maximum. This implies that it will probably be important to remove the shell, the SIM card, the SD card and the electric battery if possible. When completed, put all of these things to dry and continue to the next step.

Aspire the water that is in your Zopo Speed 8

By using a straw, you have got to suck up the water that is contained in your Zopo Speed 8. For this, you simply need to glue the straw over areas like buttons and vacuum. When you believe you have aspired all the water from your Zopo Speed 8, you will be able to start drying it.

Dry the Zopo Speed 8

The fourth step is to dry the phone. For this, we advise you to put it in front of a ventilator several hours. Avoid using solutions that cause the phone to heat up or damage the phone. When it is completed, we advise you to leave the Zopo Speed 8 in rice for 24 or 48 hours. The rice will as a result absorb the moisture that stays in the Zopo Speed 8.

Reassemble the components and turn on the Zopo Speed 8

When you have completed the previous steps, your Zopo Speed 8 should be dry. So now you can try to turn on the Zopo Speed 8. In the event that this does not perform, we advise you to wait some days or to bring the Zopo Speed 8 to a repairman.

What should not be done in cases where the Zopo Speed 8 has fallen into the water

You will find several points not to accomplish when your Zopo Speed 8 has fallen into the water. The 1st is to try to turn the phone back on just after. This can kill the Zopo Speed 8. Next, it is strongly advised not to use a heat source to dry the Zopo Speed 8. Certainly, solutions which include oven or hair dryer heat the components and may damage them. At last, to get the water out of the phone, do not shake it. Certainly, it could also damage the Zopo Speed 8.