Whether in the wc or in a swimming pool, it occasionally occurs that the Zopo Color F5 is slipped into the water. On the other hand, it isn’t simply because a cellphone has fallen into the water that it is unavoidably dead. In fact, it is possible to redo an Zopo Color F5 that has fallen into the water. To accomplish this, it is necessary to respect particular actions. People typically have bad reflexes and this is what can degrade the Zopo Color F5. We will first see the techniques to be taken after the Zopo Color F5 has fallen into the water. We will see in the secondary place the classical errors that a good number of people make.
Steps to follow if your Zopo Color F5 fell into the water
In the event that you need to restore your Zopo Color F5 in operating order, we highly recommend that you follow the steps listed below.
Don’t attempt to turn the Zopo Color F5 back on after getting out the water
One thing to accomplish when the Zopo Color F5 has fallen into the water is to shut off the cellphone. In fact, if it didn’t turn off, turn it off without doing any other tricks. If it is already off, do not attempt to turn it back on for the moment. If the Zopo Color F5 is turned on and wet, you can generate a short circuit and therefore toast the cellphone.
Remove detachable components
Once the Zopo Color F5 is out of the water and turned off, it will have to be disassembled to the maximum. Meaning that it will be necessary to take away the shell, the SIM card, the SD card and the electric battery if possible. Once completed, put all of these things to dry and proceed to the following step.
Aspire the water that is in your Zopo Color F5
Employing a straw, you will need to suck up the water that is contained in your Zopo Color F5. For doing it, you only need to glue the straw over areas like buttons and vacuum. Once you believe you have aspired all the water from your Zopo Color F5, you will be ready to start drying it.
Dry the Zopo Color F5
The fourth step is to dry the cellphone. For this, we advise you to put it in front of a ventilator several hours. Prevent using techniques that cause the cellphone to heat up or damage the cellphone. Once it is done, we advise you to leave the Zopo Color F5 in rice for 24 or 48 hours. The rice will therefore absorb the wetness that remains in the Zopo Color F5.
Reassemble the components and turn on the Zopo Color F5
When you have completed the previous steps, your Zopo Color F5 should be dry. So now you can try to turn on the Zopo Color F5. In the event that this doesn’t work, we advise you to hang on some days or to bring the Zopo Color F5 to a repairman.
What should not be done if the Zopo Color F5 has fallen into the water
You will find several points not to accomplish when ever your Zopo Color F5 has fallen into the water. The first is to try to turn the cellphone back on just after. This can kill the Zopo Color F5. Next, it is strongly recommended not to use a heat source to dry the Zopo Color F5. Without a doubt, methods such as oven or hair dryer heat the components and may degrade them. Finally, to get the water out of the cellphone, do not shake it. Certainly, it could additionally damage the Zopo Color F5.
