Whether in the wc or in a pool, it occasionally happens that the Zopo Color C3 is dropped into the water. Even so, it’s not simply because a phone has fallen into the water that it is unavoidably dead. Indeed, it is feasible to redo an Zopo Color C3 that has fallen into the water. To accomplish this, it is required to respect particular steps. People generally have bad reflexes and this is what can degrade the Zopo Color C3. We will first see the methods to be taken after the Zopo Color C3 has fallen into the water. We will see in the 2nd place the common mistakes that most people make.
Steps to follow in cases where your Zopo Color C3 fell into the water
If perhaps you desire to recover your Zopo Color C3 in working order, we suggest that you follow the steps listed below.
Don’t try to turn the Zopo Color C3 back on after exiting the water
The first thing to accomplish when the Zopo Color C3 has fallen into the water is to shut off the phone. Indeed, in cases where it did not switch off, turn it off without doing any other manipulation. In cases where it is already off, do not try to turn it back on for the moment. In cases where the Zopo Color C3 is turned on and wet, you might generate a short circuit and therefore toast the phone.
Remove detachable components
Once the Zopo Color C3 is out of the water and turned off, it will have to be disassembled to the maximum. This implies that it’ll be required to take out the shell, the SIM card, the SD card and the battery if possible. Once completed, put all of these items to dry and continue to the following step.
Aspire the water that is in your Zopo Color C3
By using a straw, you need to suck up the water that is contained in your Zopo Color C3. For this, you merely need to glue the straw over areas like buttons and vacuum. Once you think you have aspired all the water from your Zopo Color C3, you will be able to start drying it.
Dry the Zopo Color C3
The fourth step is to dry the phone. For this, we suggest you to put it in front of a ventilator a number of hours. Avoid using solutions that cause the phone to heat up or damage the phone. Once it is finished, we suggest you to leave the Zopo Color C3 in rice for 24 or 48 hours. The rice will therefore absorb the moisture that stays in the Zopo Color C3.
Reassemble the components and turn on the Zopo Color C3
When you have completed the previous steps, your Zopo Color C3 should be dry. So now you can make an attempt to turn on the Zopo Color C3. If perhaps this doesn’t do the job, we suggest you to hold out some days or to bring the Zopo Color C3 to a repairshop.
What should not be done in cases where the Zopo Color C3 has fallen into the water
You will find a number of things not to accomplish when ever your Zopo Color C3 has fallen into the water. The first is to make an attempt to turn the phone back on just after. This can destroy the Zopo Color C3. Next, it is strongly recommended not to use a heat source to dry the Zopo Color C3. Without a doubt, methods such as oven or hair dryer heat the components and may degrade them. Finally, to get the water out of the phone, do not shake it. Certainly, it could likewise damage the Zopo Color C3.
