How to fix a water damaged on Yureka Black

Whether in the wc or in a swimming pool, it occasionally occurs that the Yureka Black is dropped into the water. Nonetheless, it’s not simply because a telephone has fallen into the water that it’s unavoidably dead. Certainly, it is feasible to redo an Yureka Black that has fallen into the water. To achieve this, it is essential to respect specific steps. People generally have bad reflexes and this is what can deteriorate the Yureka Black. We will first see the techniques to be taken after the Yureka Black has fallen into the water. We will see in the 2nd place the common mistakes that many people make.water-damaged-yureka-black

Methods to follow if your Yureka Black fell into the water

In the event that you wish to recover your Yureka Black in working order, we advise that you follow the steps listed below.

Don’t try to turn the Yureka Black back on after exiting the water

One thing to do when the Yureka Black has fallen into the water is to switch off the telephone. Certainly, if it didn’t switch off, turn it off without doing any other manipulation. If perhaps it is already off, do not try to turn it back on for the moment. If perhaps the Yureka Black is started and wet, you might make a short circuit and consequently toast the telephone.

Remove detachable components

When the Yureka Black is out of the water and turned off, it will have to be disassembled to the maximum. This means that it’ll be essential to remove the shell, the SIM card, the SD card and the electric battery if possible. When done, put all of these things to dry and continue to the following step.

Aspire the water that is in your Yureka Black

Using a straw, you will need to suck up the water that is contained in your Yureka Black. For doing it, you just need to glue the straw over areas like buttons and vacuum. When you believe you have aspired all the water from your Yureka Black, you will have the ability to start drying it.

Dry the Yureka Black

The fourth step is to dry the telephone. For this, we advise you to put it in front of a ventilator several hours. Prevent using méthodes that cause the telephone to heat up or damage the telephone. When it is finished, we advise you to leave the Yureka Black in rice for 24 or 48 hours. The rice will consequently absorb the moisture that remains in the Yureka Black.

Reassemble the components and turn on the Yureka Black

When you have completed the previous steps, your Yureka Black should be dry. So now you can try to turn on the Yureka Black. If perhaps this doesn’t work, we advise you to hold out a few days or to bring the Yureka Black to a repairshop.

What should not be done if the Yureka Black has fallen into the water

You will find several stuff not to do when ever your Yureka Black has fallen into the water. The first is to try to turn the telephone back on just after. This can kill the Yureka Black. Following, it is strongly advised not to use a heat source to dry the Yureka Black. Certainly, methods such as oven or hair dryer heat the components and may deteriorate them. Finally, to get the water out of the telephone, do not shake it. In fact, it could likewise damage the Yureka Black.