Whether in the toilet or in a pool, it occasionally happens that the YotaPhone 2 is dropped into the water. On the other hand, it’s not simply because a telephone has fallen into the water that it’s obviously dead. Certainly, it is feasible to redo an YotaPhone 2 that has fallen into the water. To accomplish this, it is required to respect certain steps. People generally have bad reflexes and this is what can deteriorate the YotaPhone 2. We will first of all see the methods to be taken after the YotaPhone 2 has fallen into the water. We will see in the 2nd place the classical mistakes that a large number of people make.
Steps to follow if perhaps your YotaPhone 2 fell into the water
Whenever you need to recover your YotaPhone 2 in operating order, we highly recommend that you follow the steps below.
Don’t attempt to turn the YotaPhone 2 back on after exiting the water
The very first thing to accomplish when the YotaPhone 2 has fallen into the water is to turn off the telephone. Certainly, if perhaps it did not switch off, turn it off without doing any other tricks. In the event that it is already off, do not attempt to turn it back on for the moment. In the event that the YotaPhone 2 is switched on and wet, you may produce a short circuit and consequently toast the telephone.
Remove detachable components
Once the YotaPhone 2 is out of the water and turned off, it will have to be disassembled to the maximum. Meaning that it will be required to take out the shell, the SIM card, the SD card and the electric battery if possible. Once completed, put all of these things to dry and continue to the following step.
Aspire the water that is in your YotaPhone 2
Employing a straw, you will need to suck up the water that is contained in your YotaPhone 2. For this, you simply need to glue the straw over areas like buttons and vacuum. Once you believe you have aspired all the water from your YotaPhone 2, you will be ready to start drying it.
Dry the YotaPhone 2
The fourth step is to dry the telephone. For this, we recommend you to put it in front of a ventilator several hours. Avoid using méthodes that cause the telephone to heat up or damage the telephone. Once it is performed, we recommend you to leave the YotaPhone 2 in rice for 24 or 48 hours. The rice will consequently absorb the wetness that stays in the YotaPhone 2.
Reassemble the components and turn on the YotaPhone 2
When you have completed the previous steps, your YotaPhone 2 should be dry. So now you can try to turn on the YotaPhone 2. If perhaps this does not perform, we recommend you to wait a couple of days or to bring the YotaPhone 2 to a repairshop.
What should not be done if perhaps the YotaPhone 2 has fallen into the water
There are several points not to accomplish when ever your YotaPhone 2 has fallen into the water. The first of all is to try to turn the telephone back on just after. This can destroy the YotaPhone 2. Following, it is highly advised not to use a heat source to dry the YotaPhone 2. In fact, solutions which include oven or hair dryer heat the components and may deteriorate them. Finally, to get the water out of the telephone, do not shake it. Indeed, it could also ruin the YotaPhone 2.
