How to fix a water damaged on Winnovo K43

Whether in the wc or in a swimming pool, it sometimes happens that the Winnovo K43 is dropped in the water. Nonetheless, it is not simply because a cellphone has fallen in the water that it’s inevitably dead. In fact, it is possible to redo an Winnovo K43 that has fallen in the water. To do this, it is important to respect certain steps. People frequently have bad reflexes and this is what can damage the Winnovo K43. We will first of all discover the steps to be taken after the Winnovo K43 has fallen into the water. We will discover in the secondary place the classical mistakes that a good number of people make.water-damaged-Winnovo-K43

Methods to follow if perhaps your Winnovo K43 fell into the water

If perhaps you wish to recover your Winnovo K43 in operating order, we highly recommend that you follow the steps below.

Don’t try to turn the Winnovo K43 back on after getting out the water

One thing to accomplish when the Winnovo K43 has fallen into the water is to switch off the cellphone. In fact, if perhaps it did not turn off, turn it off without doing any other tricks. If perhaps it is already off, do not try to turn it back on for the moment. If perhaps the Winnovo K43 is switched on and wet, you can produce a short circuit and therefore toast the cellphone.

Remove detachable components

Once the Winnovo K43 is out of the water and turned off, it will have to be disassembled to the highest possible. Meaning that it will probably be important to take out the shell, the SIM card, the SD card and the battery if possible. Once carried out, put all of these things to dry and proceed to the following step.

Aspire the water that is in your Winnovo K43

Employing a straw, you must suck up the water that is contained in your Winnovo K43. For this, you merely need to glue the straw over areas like buttons and vacuum. Once you believe you have aspired all the water from your Winnovo K43, you will have the capacity to start drying it.

Dry the Winnovo K43

The fourth step is to dry the cellphone. For this, we recommend you to put it in front of a ventilator a number of hours. Prevent using methods that cause the cellphone to heat up or damage the cellphone. Once it is done, we recommend you to leave the Winnovo K43 in rice for 24 or 48 hours. The rice will therefore absorb the wetness that remains in the Winnovo K43.

Reassemble the components and turn on the Winnovo K43

When you have completed the prior steps, your Winnovo K43 should be dry. So now you can make an attempt to turn on the Winnovo K43. In the event that this doesn’t do the job, we recommend you to hold out a few days or to bring the Winnovo K43 to a repairshop.

What should not be done if perhaps the Winnovo K43 has fallen into the water

You will find a number of things not to accomplish when ever your Winnovo K43 has fallen into the water. The first of all is to make an attempt to turn the cellphone back on just after. This can kill the Winnovo K43. Next, it is strongly recommended not to use a heat source to dry the Winnovo K43. In fact, solutions such as oven or hair dryer heat the components and may damage them. Finally, to get the water out of the cellphone, do not shake it. Indeed, it could as well damage the Winnovo K43.