Whether in the wc or in a pool, it from time to time occurs that the Wileyfox Swift 2X is slipped in the water. Even so, it isn’t simply because a mobile phone has fallen in the water that it is unavoidably dead. In truth, it is feasible to redo an Wileyfox Swift 2X that has fallen in the water. To get this done, it is essential to respect specific steps. People typically have bad reflexes and this is what can damage the Wileyfox Swift 2X. We will 1st discover the steps to be taken after the Wileyfox Swift 2X has fallen into the water. We will discover in the secondary place the classical mistakes that a large number of people make.
Methods to follow in cases where your Wileyfox Swift 2X fell into the water
If you desire to recover your Wileyfox Swift 2X in working order, we suggest that you follow the steps listed below.
Do not try to turn the Wileyfox Swift 2X back on after getting out the water
The first thing to accomplish when the Wileyfox Swift 2X has fallen into the water is to switch off the mobile phone. In truth, in cases where it didn’t switch off, turn it off without doing any other tricks. If it is already off, do not try to turn it back on for the moment. If the Wileyfox Swift 2X is switched on and wet, you might produce a short circuit and as a result toast the mobile phone.
Remove detachable components
Once the Wileyfox Swift 2X is out of the water and turned off, it will have to be disassembled to the highest possible. Meaning that it will probably be essential to remove the shell, the SIM card, the SD card and the battery if possible. Once done, put all of these things to dry and continue to the following step.
Aspire the water that is in your Wileyfox Swift 2X
Using a straw, you will have to suck up the water that is contained in your Wileyfox Swift 2X. For this, you simply have to glue the straw over areas like buttons and vacuum. Once you think you have aspired all the water from your Wileyfox Swift 2X, you will be ready to start drying it.
Dry the Wileyfox Swift 2X
The fourth step is to dry the mobile phone. For this, we recommend you to put it in front of a ventilator a number of hours. Avoid using méthodes that cause the mobile phone to heat up or damage the mobile phone. Once it is completed, we recommend you to leave the Wileyfox Swift 2X in rice for 24 or 48 hours. The rice will as a result absorb the moisture that stays in the Wileyfox Swift 2X.
Reassemble the components and turn on the Wileyfox Swift 2X
When you have completed the prior steps, your Wileyfox Swift 2X should be dry. So now you can try to turn on the Wileyfox Swift 2X. In the event that this does not perform, we recommend you to hold out a few days or to bring the Wileyfox Swift 2X to a repairshop.
What should not be done in cases where the Wileyfox Swift 2X has fallen into the water
There are a number of points not to accomplish when your Wileyfox Swift 2X has fallen into the water. The 1st is to try to turn the mobile phone back on just after. This can demolish the Wileyfox Swift 2X. Following, it is highly advised not to use a heat source to dry the Wileyfox Swift 2X. Without a doubt, methods which include oven or hair dryer heat the components and may damage them. At last, to get the water out of the mobile phone, do not shake it. In fact, it could also ruin the Wileyfox Swift 2X.
