Whether in the wc or in a swimming pool, it occasionally happens that the Wiko Wax is slipped into the water. Nonetheless, it is not because a mobile has fallen into the water that it is undoubtedly dead. Indeed, it is feasible to redo an Wiko Wax that has fallen into the water. To achieve this, it is important to respect specific steps. People frequently have bad reflexes and this is what can degrade the Wiko Wax. We will first discover the methods to be taken after the Wiko Wax has fallen into the water. We will discover in the secondary place the common mistakes that a good number of people make.
Methods to follow in the event that your Wiko Wax fell into the water
Whenever you wish to recover your Wiko Wax in operating order, we recommend that you follow the steps listed below.
Don’t attempt to turn the Wiko Wax back on after getting out the water
The first thing to accomplish when the Wiko Wax has fallen into the water is to shut off the mobile. Indeed, in the event that it didn’t switch off, turn it off without doing any other manipulation. In cases where it is already off, do not attempt to turn it back on for the moment. In cases where the Wiko Wax is turned on and wet, you may make a short circuit and as a result toast the mobile.
Remove detachable components
Once the Wiko Wax is out of the water and switched off, it will have to be disassembled to the maximum. This implies that it will be important to remove the shell, the SIM card, the SD card and the battery if possible. Once completed, put all of these things to dry and proceed to the following step.
Aspire the water that is in your Wiko Wax
Employing a straw, you will have to suck up the water that is contained in your Wiko Wax. For doing it, you just need to glue the straw over areas like buttons and vacuum. Once you think you have aspired all the water from your Wiko Wax, you will be ready to start drying it.
Dry the Wiko Wax
The fourth step is to dry the mobile. For this, we suggest you to put it in front of a ventilator several hours. Prevent using méthodes that cause the mobile to heat up or damage the mobile. Once it is performed, we suggest you to leave the Wiko Wax in rice for 24 or 48 hours. The rice will as a result absorb the moisture that remains in the Wiko Wax.
Reassemble the components and turn on the Wiko Wax
When you have completed the previous steps, your Wiko Wax should be dry. So now you can make an attempt to turn on the Wiko Wax. In the event that this does not work, we suggest you to hang on a couple of days or to bring the Wiko Wax to a repairshop.
What should not be done in the event that the Wiko Wax has fallen into the water
You will find several stuff not to accomplish when your Wiko Wax has fallen into the water. The first is to make an attempt to turn the mobile back on just after. This can kill the Wiko Wax. Next, it is highly suggested not to use a heat source to dry the Wiko Wax. Indeed, solutions which include oven or hair dryer heat the components and may degrade them. At last, to get the water out of the mobile, do not shake it. Indeed, it could also ruin the Wiko Wax.
