How to fix a water damaged on Wiko VIEW

Whether in the wc or in a swimming pool, it from time to time occurs that the Wiko VIEW is slipped into the water. On the other hand, it is not simply because a phone has fallen into the water that it’s undoubtedly dead. Certainly, it is possible to redo an Wiko VIEW that has fallen into the water. To achieve this, it is needed to respect certain actions. People often have bad reflexes and this is what can deteriorate the Wiko VIEW. We will first see the methods to be taken after the Wiko VIEW has fallen into the water. We will see in the secondary place the classical mistakes that most people make.water-damaged-wiko-view

Methods to follow in cases where your Wiko VIEW fell into the water

If you want to recover your Wiko VIEW in working order, we highly recommend that you follow the steps listed below.

Do not try to turn the Wiko VIEW back on after getting out the water

The first thing to accomplish when the Wiko VIEW has fallen into the water is to switch off the phone. Certainly, in cases where it didn’t turn off, turn it off without doing any other tricks. In the event that it is already off, do not try to turn it back on for the moment. In the event that the Wiko VIEW is switched on and wet, you could create a short circuit and as a result toast the phone.

Remove detachable components

When the Wiko VIEW is out of the water and turned off, it will have to be disassembled to the highest possible. This implies that it’ll be needed to remove the shell, the SIM card, the SD card and the battery if possible. When carried out, put all of these items to dry and continue to the next step.

Aspire the water that is in your Wiko VIEW

Employing a straw, you must suck up the water that is contained in your Wiko VIEW. For this, you only need to glue the straw over areas like buttons and vacuum. When you think you have aspired all the water from your Wiko VIEW, you will have the ability to start drying it.

Dry the Wiko VIEW

The fourth step is to dry the phone. For this, we suggest you to put it in front of a ventilator several hours. Prevent using techniques that cause the phone to heat up or damage the phone. When it is finished, we suggest you to leave the Wiko VIEW in rice for 24 or 48 hours. The rice will as a result absorb the wetness that stays in the Wiko VIEW.

Reassemble the components and turn on the Wiko VIEW

When you have completed the previous steps, your Wiko VIEW should be dry. So now you can make an attempt to turn on the Wiko VIEW. If perhaps this does not do the job, we suggest you to hang on a couple of days or to bring the Wiko VIEW to a repairman.

What should not be done in cases where the Wiko VIEW has fallen into the water

There are several things not to accomplish when ever your Wiko VIEW has fallen into the water. The first is to make an attempt to turn the phone back on just after. This can destroy the Wiko VIEW. Next, it is highly recommended not to use a heat source to dry the Wiko VIEW. In fact, methods such as oven or hair dryer heat the components and may deteriorate them. At last, to get the water out of the phone, do not shake it. Indeed, it could also ruin the Wiko VIEW.