How to fix a water damaged on Wiko VIEW XL

Whether in the wc or in a swimming pool, it from time to time happens that the Wiko VIEW XL is slipped in the water. On the other hand, it is not simply because a telephone has fallen in the water that it’s unavoidably dead. Certainly, it is feasible to redo an Wiko VIEW XL that has fallen in the water. To get this done, it is needed to respect certain steps. People typically have bad reflexes and this is what can degrade the Wiko VIEW XL. We will first of all see the methods to be taken after the Wiko VIEW XL has fallen into the water. We will see in the 2nd place the common mistakes that many people make.water-damaged-wiko-view-xl

Steps to follow in the event that your Wiko VIEW XL fell into the water

In the event that you want to recover your Wiko VIEW XL in working order, we highly recommend that you follow the steps listed below.

Do not attempt to turn the Wiko VIEW XL back on after getting out the water

The first thing to perform when the Wiko VIEW XL has fallen into the water is to turn off the telephone. Certainly, in the event that it didn’t turn off, turn it off without doing any other manipulation. In cases where it is already off, do not attempt to turn it back on for the moment. In cases where the Wiko VIEW XL is switched on and wet, you can create a short circuit and therefore toast the telephone.

Remove detachable components

Once the Wiko VIEW XL is out of the water and turned off, it will have to be disassembled to the highest possible. This means that it will be needed to take out the shell, the SIM card, the SD card and the battery if possible. Once done, put all of these items to dry and continue to the following step.

Aspire the water that is in your Wiko VIEW XL

Using a straw, you need to suck up the water that is contained in your Wiko VIEW XL. For doing it, you merely have to glue the straw over areas like buttons and vacuum. Once you believe you have aspired all the water from your Wiko VIEW XL, you will have the capacity to start drying it.

Dry the Wiko VIEW XL

The fourth step is to dry the telephone. For this, we advise you to put it in front of a ventilator a number of hours. Prevent using méthodes that cause the telephone to heat up or damage the telephone. Once it is finished, we advise you to leave the Wiko VIEW XL in rice for 24 or 48 hours. The rice will therefore absorb the moisture that stays in the Wiko VIEW XL.

Reassemble the components and turn on the Wiko VIEW XL

When you have completed the previous steps, your Wiko VIEW XL should be dry. So now you can try to turn on the Wiko VIEW XL. In the event that this does not perform, we advise you to wait a few days or to bring the Wiko VIEW XL to a repairshop.

What should not be done in the event that the Wiko VIEW XL has fallen into the water

There are a number of things not to perform when your Wiko VIEW XL has fallen into the water. The first of all is to try to turn the telephone back on just after. This can kill the Wiko VIEW XL. Next, it is strongly suggested not to use a heat source to dry the Wiko VIEW XL. In fact, methods which include oven or hair dryer heat the components and may degrade them. At last, to get the water out of the telephone, do not shake it. Certainly, it could additionally damage the Wiko VIEW XL.