How to fix a water damaged on Wiko View Go

Whether in the toilet or in a pool, it sometimes happens that the Wiko View Go is slipped into the water. On the other hand, it’s not because a mobile phone has fallen into the water that it’s unavoidably dead. In truth, it is feasible to redo an Wiko View Go that has fallen into the water. To get this done, it is necessary to respect specific actions. People typically have bad reflexes and this is what can damage the Wiko View Go. We will first discover the steps to be taken after the Wiko View Go has fallen into the water. We will discover in the second place the classical errors that most people make.water-damaged-wiko-view-go

Steps to follow if perhaps your Wiko View Go fell into the water

In the event that you wish to recover your Wiko View Go in operating order, we advise that you follow the steps below.

Don’t attempt to turn the Wiko View Go back on after exiting the water

The first thing to do when the Wiko View Go has fallen into the water is to switch off the mobile phone. In truth, if perhaps it did not switch off, turn it off without doing any other tricks. If perhaps it is already off, do not attempt to turn it back on for the moment. If perhaps the Wiko View Go is turned on and wet, you could create a short circuit and consequently toast the mobile phone.

Remove detachable components

When the Wiko View Go is out of the water and turned off, it will have to be disassembled to the maximum. Meaning that it’ll be necessary to take away the shell, the SIM card, the SD card and the electric battery if possible. When completed, put all of these things to dry and proceed to the following step.

Aspire the water that is in your Wiko View Go

By using a straw, you need to suck up the water that is contained in your Wiko View Go. For doing it, you just need to glue the straw over areas like buttons and vacuum. When you believe you have aspired all the water from your Wiko View Go, you will have the capacity to start drying it.

Dry the Wiko View Go

The fourth step is to dry the mobile phone. For this, we suggest you to put it in front of a ventilator several hours. Avoid using techniques that cause the mobile phone to heat up or damage the mobile phone. When it is performed, we suggest you to leave the Wiko View Go in rice for 24 or 48 hours. The rice will consequently absorb the moisture that stays in the Wiko View Go.

Reassemble the components and turn on the Wiko View Go

When you have completed the previous steps, your Wiko View Go should be dry. So now you can try to turn on the Wiko View Go. If this does not function, we suggest you to hang on a couple of days or to bring the Wiko View Go to a repairshop.

What should not be done if perhaps the Wiko View Go has fallen into the water

You will find several points not to do when your Wiko View Go has fallen into the water. The first is to try to turn the mobile phone back on just after. This can destroy the Wiko View Go. Next, it is highly advised not to use a heat source to dry the Wiko View Go. In fact, techniques which include oven or hair dryer heat the components and may damage them. At last, to get the water out of the mobile phone, do not shake it. Indeed, it could likewise ruin the Wiko View Go.