Whether in the toilet or in a pool, it sometimes happens that the Wiko View 2 is dropped into the water. On the other hand, it’s not because a mobile phone has fallen into the water that it’s obviously dead. In truth, it is feasible to redo an Wiko View 2 that has fallen into the water. To get this done, it is required to respect certain steps. People often have bad reflexes and this is what can degrade the Wiko View 2 . We will first of all see the techniques to be taken after the Wiko View 2 has fallen into the water. We will see in the 2nd place the common mistakes that the majority of people make.
Steps to follow if perhaps your Wiko View 2 fell into the water
If perhaps you desire to restore your Wiko View 2 in working order, we advise that you follow the steps listed below.
Do not try to turn the Wiko View 2 back on after exiting the water
The very first thing to do when the Wiko View 2 has fallen into the water is to shut off the mobile phone. In truth, if perhaps it didn’t turn off, turn it off without doing any other manipulation. If perhaps it is already off, do not try to turn it back on for the moment. If perhaps the Wiko View 2 is turned on and wet, you could create a short circuit and therefore toast the mobile phone.
Remove detachable components
When the Wiko View 2 is out of the water and switched off, it will have to be disassembled to the highest possible. This implies that it will be required to take away the shell, the SIM card, the SD card and the electric battery if possible. When finished, put all of these things to dry and continue to the next step.
Aspire the water that is in your Wiko View 2
Utilizing a straw, you need to suck up the water that is contained in your Wiko View 2 . For this, you simply need to glue the straw over areas like buttons and vacuum. When you think you have aspired all the water from your Wiko View 2 , you will be able to start drying it.
Dry the Wiko View 2
The fourth step is to dry the mobile phone. For this, we recommend you to put it in front of a ventilator a number of hours. Avoid using méthodes that cause the mobile phone to heat up or damage the mobile phone. When it is finished, we recommend you to leave the Wiko View 2 in rice for 24 or 48 hours. The rice will therefore absorb the moisture that remains in the Wiko View 2 .
Reassemble the components and turn on the Wiko View 2
When you have completed the prior steps, your Wiko View 2 should be dry. So now you can try to turn on the Wiko View 2 . In the event that this doesn’t do the job, we recommend you to hold out a few days or to bring the Wiko View 2 to a repairshop.
What should not be done if perhaps the Wiko View 2 has fallen into the water
There are a number of stuff not to do when ever your Wiko View 2 has fallen into the water. The first of all is to try to turn the mobile phone back on just after. This can destroy the Wiko View 2 . Next, it is strongly advised not to use a heat source to dry the Wiko View 2 . Certainly, methods which include oven or hair dryer heat the components and may degrade them. At last, to get the water out of the mobile phone, do not shake it. In fact, it could additionally damage the Wiko View 2 .
