How to fix a water damaged on Wiko UPULSE

Whether in the wc or in a pool, it occasionally happens that the Wiko UPULSE is dropped into the water. Nonetheless, it’s not because a mobile has fallen into the water that it’s unavoidably dead. In fact, it is feasible to redo an Wiko UPULSE that has fallen into the water. To do this, it is important to respect certain steps. People frequently have bad reflexes and this is what can damage the Wiko UPULSE. We will 1st see the methods to be taken after the Wiko UPULSE has fallen into the water. We will see in the 2nd place the classical errors that a large number of people make.water-damaged-wiko-upulse

Steps to follow in the event that your Wiko UPULSE fell into the water

If you wish to recover your Wiko UPULSE in working order, we recommend that you follow the steps listed below.

Do not attempt to turn the Wiko UPULSE back on after exiting the water

One thing to do when the Wiko UPULSE has fallen into the water is to shut off the mobile. In fact, in the event that it didn’t turn off, turn it off without doing any other manipulation. If perhaps it is already off, do not attempt to turn it back on for the moment. If perhaps the Wiko UPULSE is started and wet, you might create a short circuit and therefore toast the mobile.

Remove detachable components

When the Wiko UPULSE is out of the water and switched off, it will have to be disassembled to the highest possible. Meaning that it will be important to remove the shell, the SIM card, the SD card and the battery if possible. When carried out, put all of these things to dry and continue to the following step.

Aspire the water that is in your Wiko UPULSE

Employing a straw, you have got to suck up the water that is contained in your Wiko UPULSE. For doing it, you simply need to glue the straw over areas like buttons and vacuum. When you think you have aspired all the water from your Wiko UPULSE, you will be able to start drying it.

Dry the Wiko UPULSE

The fourth step is to dry the mobile. For this, we recommend you to put it in front of a ventilator several hours. Prevent using méthodes that cause the mobile to heat up or damage the mobile. When it is completed, we recommend you to leave the Wiko UPULSE in rice for 24 or 48 hours. The rice will therefore absorb the wetness that remains in the Wiko UPULSE.

Reassemble the components and turn on the Wiko UPULSE

When you have completed the previous steps, your Wiko UPULSE should be dry. So now you can try to turn on the Wiko UPULSE. If this doesn’t function, we recommend you to hold out a few days or to bring the Wiko UPULSE to a repairshop.

What should not be done in the event that the Wiko UPULSE has fallen into the water

You will find several things not to do when your Wiko UPULSE has fallen into the water. The 1st is to try to turn the mobile back on just after. This can destroy the Wiko UPULSE. Following, it is strongly recommended not to use a heat source to dry the Wiko UPULSE. Indeed, solutions such as oven or hair dryer heat the components and may damage them. Finally, to get the water out of the mobile, do not shake it. In fact, it could likewise damage the Wiko UPULSE.