Whether in the wc or in a swimming pool, it from time to time happens that the Wiko Tommy 2 is slipped in the water. Nonetheless, it’s not because a mobile has fallen in the water that it’s obviously dead. Indeed, it is feasible to redo an Wiko Tommy 2 that has fallen in the water. To accomplish this, it is required to respect certain actions. People generally have bad reflexes and this is what can damage the Wiko Tommy 2. We will 1st discover the methods to be taken after the Wiko Tommy 2 has fallen into the water. We will discover in the 2nd place the classical mistakes that the majority of people make.
Steps to follow in the event that your Wiko Tommy 2 fell into the water
Whenever you need to restore your Wiko Tommy 2 in working order, we suggest that you follow the steps below.
Don’t try to turn the Wiko Tommy 2 back on after getting out the water
One thing to accomplish when the Wiko Tommy 2 has fallen into the water is to switch off the mobile. Indeed, in the event that it did not switch off, turn it off without doing any other tricks. In cases where it is already off, do not try to turn it back on for the moment. In cases where the Wiko Tommy 2 is turned on and wet, you may produce a short circuit and consequently toast the mobile.
Remove detachable components
When the Wiko Tommy 2 is out of the water and switched off, it will have to be disassembled to the maximum. Meaning that it will be required to take out the shell, the SIM card, the SD card and the electric battery if possible. When completed, put all of these things to dry and continue to the next step.
Aspire the water that is in your Wiko Tommy 2
By using a straw, you need to suck up the water that is contained in your Wiko Tommy 2. For doing it, you only have to glue the straw over areas like buttons and vacuum. When you believe you have aspired all the water from your Wiko Tommy 2, you will have the ability to start drying it.
Dry the Wiko Tommy 2
The fourth step is to dry the mobile. For this, we suggest you to put it in front of a ventilator several hours. Prevent using methods that cause the mobile to heat up or damage the mobile. When it is completed, we suggest you to leave the Wiko Tommy 2 in rice for 24 or 48 hours. The rice will consequently absorb the wetness that remains in the Wiko Tommy 2.
Reassemble the components and turn on the Wiko Tommy 2
When you have completed the previous steps, your Wiko Tommy 2 should be dry. So now you can try to turn on the Wiko Tommy 2. In the event that this doesn’t work, we suggest you to hang on a couple of days or to bring the Wiko Tommy 2 to a repairshop.
What should not be done in the event that the Wiko Tommy 2 has fallen into the water
There are several things not to accomplish when your Wiko Tommy 2 has fallen into the water. The 1st is to try to turn the mobile back on just after. This can demolish the Wiko Tommy 2. Following, it is strongly suggested not to use a heat source to dry the Wiko Tommy 2. Indeed, techniques which include oven or hair dryer heat the components and may damage them. Finally, to get the water out of the mobile, do not shake it. In fact, it could likewise ruin the Wiko Tommy 2.
