Whether in the toilet or in a swimming pool, it sometimes occurs that the Wiko Sunset 2 is dropped in the water. Even so, it’s not simply because a cellphone has fallen in the water that it is obviously dead. In fact, it is possible to redo an Wiko Sunset 2 that has fallen in the water. To do this, it is essential to respect specific steps. People often have bad reflexes and this is what can deteriorate the Wiko Sunset 2. We will 1st see the methods to be taken after the Wiko Sunset 2 has fallen into the water. We will see in the secondary place the common mistakes that many people make.
Steps to follow if perhaps your Wiko Sunset 2 fell into the water
If perhaps you need to recover your Wiko Sunset 2 in working order, we suggest that you follow the steps below.
Do not try to turn the Wiko Sunset 2 back on after getting out the water
The very first thing to do when the Wiko Sunset 2 has fallen into the water is to switch off the cellphone. In fact, if perhaps it did not turn off, turn it off without doing any other tricks. If perhaps it is already off, do not try to turn it back on for the moment. If perhaps the Wiko Sunset 2 is switched on and wet, you could make a short circuit and consequently toast the cellphone.
Remove detachable components
Once the Wiko Sunset 2 is out of the water and switched off, it will have to be disassembled to the highest possible. This means that it will probably be essential to take away the shell, the SIM card, the SD card and the battery if possible. Once done, put all of these things to dry and continue to the next step.
Aspire the water that is in your Wiko Sunset 2
Utilizing a straw, you will have to suck up the water that is contained in your Wiko Sunset 2. For doing it, you simply have to glue the straw over areas like buttons and vacuum. Once you believe you have aspired all the water from your Wiko Sunset 2, you will be ready to start drying it.
Dry the Wiko Sunset 2
The fourth step is to dry the cellphone. For this, we recommend you to put it in front of a ventilator a number of hours. Prevent using procédures that cause the cellphone to heat up or damage the cellphone. Once it is completed, we recommend you to leave the Wiko Sunset 2 in rice for 24 or 48 hours. The rice will consequently absorb the moisture that remains in the Wiko Sunset 2.
Reassemble the components and turn on the Wiko Sunset 2
When you have completed the prior steps, your Wiko Sunset 2 should be dry. So now you can make an attempt to turn on the Wiko Sunset 2. In the event that this doesn’t perform, we recommend you to hang on a few days or to bring the Wiko Sunset 2 to a repairman.
What should not be done if perhaps the Wiko Sunset 2 has fallen into the water
You will find a number of points not to do when ever your Wiko Sunset 2 has fallen into the water. The 1st is to make an attempt to turn the cellphone back on just after. This can demolish the Wiko Sunset 2. Next, it is highly suggested not to use a heat source to dry the Wiko Sunset 2. Certainly, techniques which include oven or hair dryer heat the components and may deteriorate them. At last, to get the water out of the cellphone, do not shake it. Certainly, it could as well ruin the Wiko Sunset 2.
