Whether in the wc or in a swimming pool, it sometimes occurs that the Wiko S-Kool is slipped in the water. Even so, it is not because a telephone has fallen in the water that it’s unavoidably dead. In truth, it is possible to redo an Wiko S-Kool that has fallen in the water. To do this, it is important to respect certain actions. People frequently have bad reflexes and this is what can damage the Wiko S-Kool. We will first see the steps to be taken after the Wiko S-Kool has fallen into the water. We will see in the second place the common mistakes that a good number of people make.
Methods to follow in cases where your Wiko S-Kool fell into the water
Whenever you desire to recover your Wiko S-Kool in operating order, we suggest that you follow the steps below.
Do not try to turn the Wiko S-Kool back on after exiting the water
The very first thing to perform when the Wiko S-Kool has fallen into the water is to shut off the telephone. In truth, in cases where it didn’t turn off, turn it off without doing any other manipulation. If perhaps it is already off, do not try to turn it back on for the moment. If perhaps the Wiko S-Kool is switched on and wet, you can create a short circuit and therefore toast the telephone.
Remove detachable components
Once the Wiko S-Kool is out of the water and switched off, it will have to be disassembled to the highest possible. This implies that it will be important to take away the shell, the SIM card, the SD card and the battery if possible. Once carried out, put all of these things to dry and continue to the next step.
Aspire the water that is in your Wiko S-Kool
Employing a straw, you need to suck up the water that is contained in your Wiko S-Kool. For this, you just have to glue the straw over areas like buttons and vacuum. Once you believe you have aspired all the water from your Wiko S-Kool, you will have the capacity to start drying it.
Dry the Wiko S-Kool
The fourth step is to dry the telephone. For this, we recommend you to put it in front of a ventilator several hours. Avoid using méthodes that cause the telephone to heat up or damage the telephone. Once it is done, we recommend you to leave the Wiko S-Kool in rice for 24 or 48 hours. The rice will therefore absorb the moisture that stays in the Wiko S-Kool.
Reassemble the components and turn on the Wiko S-Kool
When you have completed the previous steps, your Wiko S-Kool should be dry. So now you can make an attempt to turn on the Wiko S-Kool. If this does not function, we recommend you to hang on a couple of days or to bring the Wiko S-Kool to a repairshop.
What should not be done in cases where the Wiko S-Kool has fallen into the water
You will find several points not to perform when your Wiko S-Kool has fallen into the water. The first is to make an attempt to turn the telephone back on just after. This can demolish the Wiko S-Kool. Next, it is highly suggested not to use a heat source to dry the Wiko S-Kool. Indeed, methods which include oven or hair dryer heat the components and may damage them. At last, to get the water out of the telephone, do not shake it. In fact, it could also ruin the Wiko S-Kool.
