Whether in the toilet or in a swimming pool, it from time to time occurs that the Wiko Lenny is slipped into the water. However, it is not because a phone has fallen into the water that it’s obviously dead. Certainly, it is possible to redo an Wiko Lenny that has fallen into the water. To get this done, it is important to respect particular steps. People typically have bad reflexes and this is what can degrade the Wiko Lenny. We will first of all discover the methods to be taken after the Wiko Lenny has fallen into the water. We will discover in the 2nd place the common errors that most people make.
Steps to follow in cases where your Wiko Lenny fell into the water
In the event that you need to recover your Wiko Lenny in operating order, we advise that you follow the steps listed below.
Do not attempt to turn the Wiko Lenny back on after exiting the water
The first thing to accomplish when the Wiko Lenny has fallen into the water is to turn off the phone. Certainly, in cases where it didn’t turn off, turn it off without doing any other tricks. If perhaps it is already off, do not attempt to turn it back on for the moment. If perhaps the Wiko Lenny is turned on and wet, you might make a short circuit and consequently toast the phone.
Remove detachable components
When the Wiko Lenny is out of the water and switched off, it will have to be disassembled to the maximum. This means that it will probably be important to take out the shell, the SIM card, the SD card and the electric battery if possible. When finished, put all of these things to dry and continue to the next step.
Aspire the water that is in your Wiko Lenny
By using a straw, you will have to suck up the water that is contained in your Wiko Lenny. For this, you merely need to glue the straw over areas like buttons and vacuum. When you believe you have aspired all the water from your Wiko Lenny, you will be able to start drying it.
Dry the Wiko Lenny
The fourth step is to dry the phone. For this, we suggest you to put it in front of a ventilator a number of hours. Avoid using procédures that cause the phone to heat up or damage the phone. When it is done, we suggest you to leave the Wiko Lenny in rice for 24 or 48 hours. The rice will consequently absorb the wetness that remains in the Wiko Lenny.
Reassemble the components and turn on the Wiko Lenny
When you have completed the previous steps, your Wiko Lenny should be dry. So now you can make an attempt to turn on the Wiko Lenny. If perhaps this doesn’t perform, we suggest you to hang on a few days or to bring the Wiko Lenny to a repairman.
What should not be done in cases where the Wiko Lenny has fallen into the water
There are a number of things not to accomplish when ever your Wiko Lenny has fallen into the water. The first of all is to make an attempt to turn the phone back on just after. This can demolish the Wiko Lenny. Following, it is highly advised not to use a heat source to dry the Wiko Lenny. Indeed, solutions which include oven or hair dryer heat the components and may degrade them. At last, to get the water out of the phone, do not shake it. Certainly, it could as well damage the Wiko Lenny.
