Whether in the wc or in a swimming pool, it sometimes happens that the Wiko Jimmy is slipped in the water. On the other hand, it isn’t simply because a cellphone has fallen in the water that it’s unavoidably dead. In fact, it is feasible to redo an Wiko Jimmy that has fallen in the water. To get this done, it is important to respect particular actions. People frequently have bad reflexes and this is what can damage the Wiko Jimmy. We will 1st see the steps to be taken after the Wiko Jimmy has fallen into the water. We will see in the 2nd place the common errors that a large number of people make.
Steps to follow if perhaps your Wiko Jimmy fell into the water
If you desire to recover your Wiko Jimmy in working order, we recommend that you follow the steps below.
Don’t attempt to turn the Wiko Jimmy back on after getting out the water
The first thing to accomplish when the Wiko Jimmy has fallen into the water is to turn off the cellphone. In fact, if perhaps it didn’t switch off, turn it off without doing any other tricks. If it is already off, do not attempt to turn it back on for the moment. If the Wiko Jimmy is turned on and wet, you can make a short circuit and consequently toast the cellphone.
Remove detachable components
Once the Wiko Jimmy is out of the water and switched off, it will have to be disassembled to the highest possible. This implies that it’ll be important to take out the shell, the SIM card, the SD card and the battery if possible. Once performed, put all of these items to dry and continue to the next step.
Aspire the water that is in your Wiko Jimmy
By using a straw, you need to suck up the water that is contained in your Wiko Jimmy. For this, you only have to glue the straw over areas like buttons and vacuum. Once you think you have aspired all the water from your Wiko Jimmy, you will have the ability to start drying it.
Dry the Wiko Jimmy
The fourth step is to dry the cellphone. For this, we suggest you to put it in front of a ventilator several hours. Avoid using méthodes that cause the cellphone to heat up or damage the cellphone. Once it is completed, we suggest you to leave the Wiko Jimmy in rice for 24 or 48 hours. The rice will consequently absorb the moisture that stays in the Wiko Jimmy.
Reassemble the components and turn on the Wiko Jimmy
When you have completed the previous steps, your Wiko Jimmy should be dry. So now you can try to turn on the Wiko Jimmy. In the event that this does not perform, we suggest you to hang on some days or to bring the Wiko Jimmy to a repairshop.
What should not be done if perhaps the Wiko Jimmy has fallen into the water
There are several points not to accomplish when ever your Wiko Jimmy has fallen into the water. The 1st is to try to turn the cellphone back on just after. This can demolish the Wiko Jimmy. Next, it is highly recommended not to use a heat source to dry the Wiko Jimmy. In fact, solutions such as oven or hair dryer heat the components and may damage them. At last, to get the water out of the cellphone, do not shake it. Certainly, it could likewise ruin the Wiko Jimmy.
