Whether in the toilet or in a swimming pool, it occasionally happens that the Wiko JERRY 2 is slipped in the water. Even so, it isn’t because a mobile phone has fallen in the water that it’s undoubtedly dead. In fact, it is possible to redo an Wiko JERRY 2 that has fallen in the water. To achieve this, it is important to respect particular steps. People generally have bad reflexes and this is what can damage the Wiko JERRY 2. We will 1st see the methods to be taken after the Wiko JERRY 2 has fallen into the water. We will see in the second place the common mistakes that a good number of people make.
Methods to follow in cases where your Wiko JERRY 2 fell into the water
If you desire to restore your Wiko JERRY 2 in operating order, we advise that you follow the steps listed below.
Do not attempt to turn the Wiko JERRY 2 back on after getting out the water
One thing to accomplish when the Wiko JERRY 2 has fallen into the water is to shut off the mobile phone. In fact, in cases where it didn’t turn off, turn it off without doing any other tricks. If it is already off, do not attempt to turn it back on for the moment. If the Wiko JERRY 2 is started and wet, you might create a short circuit and consequently toast the mobile phone.
Remove detachable components
Once the Wiko JERRY 2 is out of the water and turned off, it will have to be disassembled to the maximum. This implies that it will probably be important to remove the shell, the SIM card, the SD card and the electric battery if possible. Once carried out, put all of these items to dry and continue to the following step.
Aspire the water that is in your Wiko JERRY 2
Employing a straw, you will need to suck up the water that is contained in your Wiko JERRY 2. For doing it, you merely need to glue the straw over areas like buttons and vacuum. Once you think you have aspired all the water from your Wiko JERRY 2, you will have the ability to start drying it.
Dry the Wiko JERRY 2
The fourth step is to dry the mobile phone. For this, we suggest you to put it in front of a ventilator several hours. Avoid using méthodes that cause the mobile phone to heat up or damage the mobile phone. Once it is performed, we suggest you to leave the Wiko JERRY 2 in rice for 24 or 48 hours. The rice will consequently absorb the wetness that stays in the Wiko JERRY 2.
Reassemble the components and turn on the Wiko JERRY 2
When you have completed the prior steps, your Wiko JERRY 2 should be dry. So now you can try to turn on the Wiko JERRY 2. In the event that this does not perform, we suggest you to hang on some days or to bring the Wiko JERRY 2 to a repairman.
What should not be done in cases where the Wiko JERRY 2 has fallen into the water
You will find several stuff not to accomplish when ever your Wiko JERRY 2 has fallen into the water. The 1st is to try to turn the mobile phone back on just after. This can destroy the Wiko JERRY 2. Following, it is highly suggested not to use a heat source to dry the Wiko JERRY 2. In fact, methods such as oven or hair dryer heat the components and may damage them. Finally, to get the water out of the mobile phone, do not shake it. In fact, it could likewise damage the Wiko JERRY 2.
