Whether in the toilet or in a pool, it occasionally occurs that the Wiko Highway is slipped into the water. Even so, it’s not because a mobile has fallen into the water that it’s undoubtedly dead. Indeed, it is possible to redo an Wiko Highway that has fallen into the water. To get this done, it is essential to respect particular steps. People generally have bad reflexes and this is what can deteriorate the Wiko Highway. We will first see the steps to be taken after the Wiko Highway has fallen into the water. We will see in the second place the classical mistakes that many people make.
Methods to follow in the event that your Wiko Highway fell into the water
If you want to restore your Wiko Highway in working order, we highly recommend that you follow the steps below.
Do not attempt to turn the Wiko Highway back on after exiting the water
One thing to perform when the Wiko Highway has fallen into the water is to shut off the mobile. Indeed, in the event that it did not turn off, turn it off without doing any other manipulation. If perhaps it is already off, do not attempt to turn it back on for the moment. If perhaps the Wiko Highway is turned on and wet, you may generate a short circuit and therefore toast the mobile.
Remove detachable components
When the Wiko Highway is out of the water and switched off, it will have to be disassembled to the highest possible. This means that it will probably be essential to remove the shell, the SIM card, the SD card and the battery if possible. When carried out, put all of these items to dry and proceed to the following step.
Aspire the water that is in your Wiko Highway
Employing a straw, you will have to suck up the water that is contained in your Wiko Highway. For this, you simply have to glue the straw over areas like buttons and vacuum. When you think you have aspired all the water from your Wiko Highway, you will be ready to start drying it.
Dry the Wiko Highway
The fourth step is to dry the mobile. For this, we advise you to put it in front of a ventilator a number of hours. Avoid using méthodes that cause the mobile to heat up or damage the mobile. When it is completed, we advise you to leave the Wiko Highway in rice for 24 or 48 hours. The rice will therefore absorb the wetness that stays in the Wiko Highway.
Reassemble the components and turn on the Wiko Highway
When you have completed the prior steps, your Wiko Highway should be dry. So now you can make an attempt to turn on the Wiko Highway. If perhaps this doesn’t function, we advise you to hang on some days or to bring the Wiko Highway to a repairman.
What should not be done in the event that the Wiko Highway has fallen into the water
There are a number of things not to perform when ever your Wiko Highway has fallen into the water. The first is to make an attempt to turn the mobile back on just after. This can kill the Wiko Highway. Following, it is strongly suggested not to use a heat source to dry the Wiko Highway. Without a doubt, techniques which include oven or hair dryer heat the components and may deteriorate them. Finally, to get the water out of the mobile, do not shake it. Indeed, it could as well ruin the Wiko Highway.
