Whether in the wc or in a pool, it sometimes occurs that the Wiko Highway Pure is slipped in the water. Nevertheless, it isn’t simply because a phone has fallen in the water that it’s obviously dead. In fact, it is feasible to redo an Wiko Highway Pure that has fallen in the water. To get this done, it is important to respect specific steps. People generally have bad reflexes and this is what can degrade the Wiko Highway Pure. We will first of all see the methods to be taken after the Wiko Highway Pure has fallen into the water. We will see in the 2nd place the classical mistakes that many people make.
Methods to follow if your Wiko Highway Pure fell into the water
If you want to recover your Wiko Highway Pure in operating order, we highly recommend that you follow the steps below.
Do not try to turn the Wiko Highway Pure back on after getting out the water
One thing to perform when the Wiko Highway Pure has fallen into the water is to turn off the phone. In fact, if it didn’t switch off, turn it off without doing any other tricks. If perhaps it is already off, do not try to turn it back on for the moment. If perhaps the Wiko Highway Pure is turned on and wet, you can produce a short circuit and consequently toast the phone.
Remove detachable components
When the Wiko Highway Pure is out of the water and switched off, it will have to be disassembled to the highest possible. This implies that it’ll be important to take out the shell, the SIM card, the SD card and the battery if possible. When done, put all of these items to dry and continue to the following step.
Aspire the water that is in your Wiko Highway Pure
Employing a straw, you have got to suck up the water that is contained in your Wiko Highway Pure. For doing it, you only need to glue the straw over areas like buttons and vacuum. When you believe you have aspired all the water from your Wiko Highway Pure, you will be ready to start drying it.
Dry the Wiko Highway Pure
The fourth step is to dry the phone. For this, we suggest you to put it in front of a ventilator a number of hours. Avoid using procédures that cause the phone to heat up or damage the phone. When it is completed, we suggest you to leave the Wiko Highway Pure in rice for 24 or 48 hours. The rice will consequently absorb the moisture that stays in the Wiko Highway Pure.
Reassemble the components and turn on the Wiko Highway Pure
When you have completed the previous steps, your Wiko Highway Pure should be dry. So now you can try to turn on the Wiko Highway Pure. If perhaps this does not do the job, we suggest you to wait a couple of days or to bring the Wiko Highway Pure to a repairman.
What should not be done if the Wiko Highway Pure has fallen into the water
There are a number of points not to perform when ever your Wiko Highway Pure has fallen into the water. The first of all is to try to turn the phone back on just after. This can kill the Wiko Highway Pure. Following, it is strongly advised not to use a heat source to dry the Wiko Highway Pure. Without a doubt, techniques which include oven or hair dryer heat the components and may degrade them. Finally, to get the water out of the phone, do not shake it. In fact, it could as well damage the Wiko Highway Pure.
