Whether in the wc or in a swimming pool, it from time to time happens that the Wiko Getaway is dropped in the water. On the other hand, it’s not simply because a phone has fallen in the water that it is inevitably dead. Indeed, it is possible to redo an Wiko Getaway that has fallen in the water. To achieve this, it is needed to respect specific steps. People typically have bad reflexes and this is what can damage the Wiko Getaway. We will first of all see the techniques to be taken after the Wiko Getaway has fallen into the water. We will see in the secondary place the classical mistakes that a good number of people make.
Methods to follow if your Wiko Getaway fell into the water
If you desire to recover your Wiko Getaway in working order, we advise that you follow the steps below.
Don’t try to turn the Wiko Getaway back on after getting out the water
The first thing to perform when the Wiko Getaway has fallen into the water is to switch off the phone. Indeed, if it did not switch off, turn it off without doing any other manipulation. If it is already off, do not try to turn it back on for the moment. If the Wiko Getaway is turned on and wet, you might create a short circuit and therefore toast the phone.
Remove detachable components
Once the Wiko Getaway is out of the water and turned off, it will have to be disassembled to the maximum. This means that it’ll be needed to remove the shell, the SIM card, the SD card and the electric battery if possible. Once finished, put all of these items to dry and continue to the next step.
Aspire the water that is in your Wiko Getaway
Employing a straw, you will have to suck up the water that is contained in your Wiko Getaway. For this, you simply have to glue the straw over areas like buttons and vacuum. Once you think you have aspired all the water from your Wiko Getaway, you will have the capacity to start drying it.
Dry the Wiko Getaway
The fourth step is to dry the phone. For this, we recommend you to put it in front of a ventilator several hours. Prevent using techniques that cause the phone to heat up or damage the phone. Once it is performed, we recommend you to leave the Wiko Getaway in rice for 24 or 48 hours. The rice will therefore absorb the wetness that stays in the Wiko Getaway.
Reassemble the components and turn on the Wiko Getaway
When you have completed the previous steps, your Wiko Getaway should be dry. So now you can make an attempt to turn on the Wiko Getaway. If this does not perform, we recommend you to wait a few days or to bring the Wiko Getaway to a repairman.
What should not be done if the Wiko Getaway has fallen into the water
There are several stuff not to perform when ever your Wiko Getaway has fallen into the water. The first of all is to make an attempt to turn the phone back on just after. This can demolish the Wiko Getaway. Following, it is strongly recommended not to use a heat source to dry the Wiko Getaway. Without a doubt, methods such as oven or hair dryer heat the components and may damage them. At last, to get the water out of the phone, do not shake it. Indeed, it could likewise ruin the Wiko Getaway.
