How to fix a water damaged on Wiko Freddy

Whether in the toilet or in a pool, it from time to time occurs that the Wiko Freddy is slipped into the water. However, it’s not because a phone has fallen into the water that it’s obviously dead. Certainly, it is possible to redo an Wiko Freddy that has fallen into the water. To accomplish this, it is required to respect particular actions. People frequently have bad reflexes and this is what can degrade the Wiko Freddy. We will first see the steps to be taken after the Wiko Freddy has fallen into the water. We will see in the 2nd place the classical errors that many people make.water-damaged-Wiko-Freddy

Methods to follow if your Wiko Freddy fell into the water

If perhaps you wish to recover your Wiko Freddy in working order, we advise that you follow the steps listed below.

Don’t try to turn the Wiko Freddy back on after exiting the water

One thing to accomplish when the Wiko Freddy has fallen into the water is to turn off the phone. Certainly, if it did not switch off, turn it off without doing any other manipulation. In the event that it is already off, do not try to turn it back on for the moment. In the event that the Wiko Freddy is started and wet, you may produce a short circuit and consequently toast the phone.

Remove detachable components

When the Wiko Freddy is out of the water and turned off, it will have to be disassembled to the maximum. Meaning that it’ll be required to remove the shell, the SIM card, the SD card and the electric battery if possible. When finished, put all of these items to dry and continue to the next step.

Aspire the water that is in your Wiko Freddy

Using a straw, you have got to suck up the water that is contained in your Wiko Freddy. For doing it, you only have to glue the straw over areas like buttons and vacuum. When you believe you have aspired all the water from your Wiko Freddy, you will be able to start drying it.

Dry the Wiko Freddy

The fourth step is to dry the phone. For this, we recommend you to put it in front of a ventilator a number of hours. Avoid using solutions that cause the phone to heat up or damage the phone. When it is performed, we recommend you to leave the Wiko Freddy in rice for 24 or 48 hours. The rice will consequently absorb the wetness that stays in the Wiko Freddy.

Reassemble the components and turn on the Wiko Freddy

When you have completed the previous steps, your Wiko Freddy should be dry. So now you can try to turn on the Wiko Freddy. In the event that this does not work, we recommend you to hang on some days or to bring the Wiko Freddy to a repairshop.

What should not be done if the Wiko Freddy has fallen into the water

There are a number of points not to accomplish when ever your Wiko Freddy has fallen into the water. The first is to try to turn the phone back on just after. This can demolish the Wiko Freddy. Following, it is highly suggested not to use a heat source to dry the Wiko Freddy. Indeed, solutions such as oven or hair dryer heat the components and may degrade them. Finally, to get the water out of the phone, do not shake it. Indeed, it could also ruin the Wiko Freddy.