Whether in the wc or in a pool, it from time to time occurs that the Wiko Cink+ is slipped in the water. However, it is not because a cellphone has fallen in the water that it is unavoidably dead. In truth, it is possible to redo an Wiko Cink+ that has fallen in the water. To do this, it is essential to respect particular actions. People typically have bad reflexes and this is what can deteriorate the Wiko Cink+. We will first see the steps to be taken after the Wiko Cink+ has fallen into the water. We will see in the second place the common mistakes that many people make.
Methods to follow if perhaps your Wiko Cink+ fell into the water
If perhaps you desire to restore your Wiko Cink+ in working order, we advise that you follow the steps listed below.
Do not attempt to turn the Wiko Cink+ back on after getting out the water
The very first thing to accomplish when the Wiko Cink+ has fallen into the water is to turn off the cellphone. In truth, if perhaps it did not switch off, turn it off without doing any other tricks. In the event that it is already off, do not attempt to turn it back on for the moment. In the event that the Wiko Cink+ is started and wet, you can create a short circuit and therefore toast the cellphone.
Remove detachable components
Once the Wiko Cink+ is out of the water and turned off, it will have to be disassembled to the highest possible. Meaning that it’ll be essential to take out the shell, the SIM card, the SD card and the battery if possible. Once completed, put all of these things to dry and proceed to the following step.
Aspire the water that is in your Wiko Cink+
Using a straw, you will have to suck up the water that is contained in your Wiko Cink+. For doing it, you simply need to glue the straw over areas like buttons and vacuum. Once you believe you have aspired all the water from your Wiko Cink+, you will have the capacity to start drying it.
Dry the Wiko Cink+
The fourth step is to dry the cellphone. For this, we recommend you to put it in front of a ventilator a number of hours. Prevent using solutions that cause the cellphone to heat up or damage the cellphone. Once it is done, we recommend you to leave the Wiko Cink+ in rice for 24 or 48 hours. The rice will therefore absorb the wetness that remains in the Wiko Cink+.
Reassemble the components and turn on the Wiko Cink+
When you have completed the previous steps, your Wiko Cink+ should be dry. So now you can try to turn on the Wiko Cink+. If perhaps this does not do the job, we recommend you to wait a couple of days or to bring the Wiko Cink+ to a repairshop.
What should not be done if perhaps the Wiko Cink+ has fallen into the water
You will find a number of stuff not to accomplish when your Wiko Cink+ has fallen into the water. The first is to try to turn the cellphone back on just after. This can demolish the Wiko Cink+. Following, it is strongly advised not to use a heat source to dry the Wiko Cink+. Without a doubt, solutions such as oven or hair dryer heat the components and may deteriorate them. At last, to get the water out of the cellphone, do not shake it. Certainly, it could additionally ruin the Wiko Cink+.
