Whether in the wc or in a swimming pool, it from time to time happens that the Wiko Cink Peax 2 is dropped in the water. Nevertheless, it isn’t simply because a mobile phone has fallen in the water that it’s inevitably dead. Certainly, it is possible to redo an Wiko Cink Peax 2 that has fallen in the water. To achieve this, it is needed to respect specific actions. People frequently have bad reflexes and this is what can damage the Wiko Cink Peax 2. We will 1st see the techniques to be taken after the Wiko Cink Peax 2 has fallen into the water. We will see in the second place the common mistakes that a good number of people make.
Methods to follow in the event that your Wiko Cink Peax 2 fell into the water
Whenever you need to recover your Wiko Cink Peax 2 in working order, we advise that you follow the steps listed below.
Don’t attempt to turn the Wiko Cink Peax 2 back on after getting out the water
One thing to accomplish when the Wiko Cink Peax 2 has fallen into the water is to turn off the mobile phone. Certainly, in the event that it did not turn off, turn it off without doing any other tricks. In the event that it is already off, do not attempt to turn it back on for the moment. In the event that the Wiko Cink Peax 2 is started and wet, you could produce a short circuit and as a result toast the mobile phone.
Remove detachable components
When the Wiko Cink Peax 2 is out of the water and turned off, it will have to be disassembled to the maximum. Meaning that it will be needed to take away the shell, the SIM card, the SD card and the electric battery if possible. When carried out, put all of these items to dry and continue to the following step.
Aspire the water that is in your Wiko Cink Peax 2
Using a straw, you will need to suck up the water that is contained in your Wiko Cink Peax 2. For this, you merely have to glue the straw over areas like buttons and vacuum. When you think you have aspired all the water from your Wiko Cink Peax 2, you will have the ability to start drying it.
Dry the Wiko Cink Peax 2
The fourth step is to dry the mobile phone. For this, we advise you to put it in front of a ventilator several hours. Prevent using solutions that cause the mobile phone to heat up or damage the mobile phone. When it is done, we advise you to leave the Wiko Cink Peax 2 in rice for 24 or 48 hours. The rice will as a result absorb the wetness that remains in the Wiko Cink Peax 2.
Reassemble the components and turn on the Wiko Cink Peax 2
When you have completed the prior steps, your Wiko Cink Peax 2 should be dry. So now you can try to turn on the Wiko Cink Peax 2. If this does not do the job, we advise you to hold out some days or to bring the Wiko Cink Peax 2 to a repairshop.
What should not be done in the event that the Wiko Cink Peax 2 has fallen into the water
There are several points not to accomplish when your Wiko Cink Peax 2 has fallen into the water. The 1st is to try to turn the mobile phone back on just after. This can kill the Wiko Cink Peax 2. Following, it is highly recommended not to use a heat source to dry the Wiko Cink Peax 2. Indeed, methods which include oven or hair dryer heat the components and may damage them. At last, to get the water out of the mobile phone, do not shake it. In fact, it could additionally damage the Wiko Cink Peax 2.
