Whether in the toilet or in a swimming pool, it occasionally happens that the Wiko Cink King is dropped in the water. However, it’s not simply because a telephone has fallen in the water that it’s undoubtedly dead. In fact, it is possible to redo an Wiko Cink King that has fallen in the water. To achieve this, it is required to respect particular steps. People typically have bad reflexes and this is what can deteriorate the Wiko Cink King. We will first of all see the techniques to be taken after the Wiko Cink King has fallen into the water. We will see in the second place the common mistakes that the majority of people make.
Steps to follow in cases where your Wiko Cink King fell into the water
In the event that you want to restore your Wiko Cink King in working order, we recommend that you follow the steps below.
Don’t try to turn the Wiko Cink King back on after exiting the water
The very first thing to perform when the Wiko Cink King has fallen into the water is to switch off the telephone. In fact, in cases where it did not turn off, turn it off without doing any other tricks. If perhaps it is already off, do not try to turn it back on for the moment. If perhaps the Wiko Cink King is started and wet, you can generate a short circuit and therefore toast the telephone.
Remove detachable components
Once the Wiko Cink King is out of the water and switched off, it will have to be disassembled to the highest possible. Meaning that it will be required to take out the shell, the SIM card, the SD card and the electric battery if possible. Once performed, put all of these items to dry and proceed to the next step.
Aspire the water that is in your Wiko Cink King
Employing a straw, you have got to suck up the water that is contained in your Wiko Cink King. For doing it, you only need to glue the straw over areas like buttons and vacuum. Once you think you have aspired all the water from your Wiko Cink King, you will be able to start drying it.
Dry the Wiko Cink King
The fourth step is to dry the telephone. For this, we advise you to put it in front of a ventilator several hours. Prevent using procédures that cause the telephone to heat up or damage the telephone. Once it is finished, we advise you to leave the Wiko Cink King in rice for 24 or 48 hours. The rice will therefore absorb the wetness that stays in the Wiko Cink King.
Reassemble the components and turn on the Wiko Cink King
When you have completed the prior steps, your Wiko Cink King should be dry. So now you can make an attempt to turn on the Wiko Cink King. If perhaps this doesn’t function, we advise you to wait some days or to bring the Wiko Cink King to a repairshop.
What should not be done in cases where the Wiko Cink King has fallen into the water
You will find several things not to perform when ever your Wiko Cink King has fallen into the water. The first of all is to make an attempt to turn the telephone back on just after. This can demolish the Wiko Cink King. Following, it is strongly suggested not to use a heat source to dry the Wiko Cink King. Indeed, methods which include oven or hair dryer heat the components and may deteriorate them. Finally, to get the water out of the telephone, do not shake it. Indeed, it could also ruin the Wiko Cink King.