How to fix a water damaged on Umidigi Z1

Whether in the wc or in a swimming pool, it sometimes occurs that the Umidigi Z1 is slipped into the water. Nevertheless, it isn’t because a phone has fallen into the water that it is obviously dead. Certainly, it is feasible to redo an Umidigi Z1 that has fallen into the water. To do this, it is important to respect particular steps. People typically have bad reflexes and this is what can damage the Umidigi Z1. We will first of all discover the techniques to be taken after the Umidigi Z1 has fallen into the water. We will discover in the second place the classical errors that a good number of people make.water-damaged-umidigi-z1

Steps to follow if perhaps your Umidigi Z1 fell into the water

If perhaps you desire to restore your Umidigi Z1 in working order, we highly recommend that you follow the steps below.

Don’t try to turn the Umidigi Z1 back on after exiting the water

The first thing to perform when the Umidigi Z1 has fallen into the water is to turn off the phone. Certainly, if perhaps it didn’t turn off, turn it off without doing any other tricks. If it is already off, do not try to turn it back on for the moment. If the Umidigi Z1 is started and wet, you can make a short circuit and consequently toast the phone.

Remove detachable components

When the Umidigi Z1 is out of the water and turned off, it will have to be disassembled to the maximum. Meaning that it will be important to remove the shell, the SIM card, the SD card and the battery if possible. When performed, put all of these items to dry and proceed to the next step.

Aspire the water that is in your Umidigi Z1

Employing a straw, you will have to suck up the water that is contained in your Umidigi Z1. For this, you only have to glue the straw over areas like buttons and vacuum. When you believe you have aspired all the water from your Umidigi Z1, you will have the ability to start drying it.

Dry the Umidigi Z1

The fourth step is to dry the phone. For this, we recommend you to put it in front of a ventilator several hours. Avoid using solutions that cause the phone to heat up or damage the phone. When it is performed, we recommend you to leave the Umidigi Z1 in rice for 24 or 48 hours. The rice will consequently absorb the wetness that remains in the Umidigi Z1.

Reassemble the components and turn on the Umidigi Z1

When you have completed the previous steps, your Umidigi Z1 should be dry. So now you can try to turn on the Umidigi Z1. If this doesn’t work, we recommend you to wait a few days or to bring the Umidigi Z1 to a repairshop.

What should not be done if perhaps the Umidigi Z1 has fallen into the water

There are several stuff not to perform when your Umidigi Z1 has fallen into the water. The first of all is to try to turn the phone back on just after. This can demolish the Umidigi Z1. Following, it is highly suggested not to use a heat source to dry the Umidigi Z1. Certainly, solutions such as oven or hair dryer heat the components and may damage them. At last, to get the water out of the phone, do not shake it. Indeed, it could as well damage the Umidigi Z1.