Whether in the wc or in a swimming pool, it sometimes happens that the Sony is slipped in the water. On the other hand, it’s not because a mobile phone has fallen in the water that it is unavoidably dead. In truth, it is feasible to redo an Sony that has fallen in the water. To accomplish this, it is required to respect particular actions. People typically have bad reflexes and this is what can damage the Sony. We will first discover the techniques to be taken after the Sony has fallen into the water. We will discover in the 2nd place the common errors that most people make.
Methods to follow if perhaps your Sony fell into the water
Whenever you desire to restore your Sony in working order, we recommend that you follow the steps listed below.
Do not try to turn the Sony back on after getting out the water
The first thing to perform when the Sony has fallen into the water is to turn off the mobile phone. In truth, if perhaps it didn’t turn off, turn it off without doing any other tricks. If perhaps it is already off, do not try to turn it back on for the moment. If perhaps the Sony is switched on and wet, you could make a short circuit and consequently toast the mobile phone.
Remove detachable components
Once the Sony is out of the water and switched off, it will have to be disassembled to the maximum. This means that it’ll be required to remove the shell, the SIM card, the SD card and the battery if possible. Once carried out, put all of these items to dry and proceed to the following step.
Aspire the water that is in your Sony
Employing a straw, you will need to suck up the water that is contained in your Sony. For this, you merely have to glue the straw over areas like buttons and vacuum. Once you think you have aspired all the water from your Sony, you will have the ability to start drying it.
Dry the Sony
The fourth step is to dry the mobile phone. For this, we recommend you to put it in front of a ventilator several hours. Prevent using procédures that cause the mobile phone to heat up or damage the mobile phone. Once it is finished, we recommend you to leave the Sony in rice for 24 or 48 hours. The rice will consequently absorb the moisture that remains in the Sony.
Reassemble the components and turn on the Sony
When you have completed the prior steps, your Sony should be dry. So now you can make an attempt to turn on the Sony. If this does not perform, we recommend you to hold out a few days or to bring the Sony to a repairman.
What should not be done if perhaps the Sony has fallen into the water
There are several stuff not to perform when your Sony has fallen into the water. The first is to make an attempt to turn the mobile phone back on just after. This can kill the Sony. Next, it is strongly suggested not to use a heat source to dry the Sony. In fact, methods such as oven or hair dryer heat the components and may damage them. At last, to get the water out of the mobile phone, do not shake it. Certainly, it could additionally ruin the Sony.
