Whether in the wc or in a pool, it from time to time occurs that the Sony Xperia miro is dropped in the water. On the other hand, it isn’t because a telephone has fallen in the water that it’s undoubtedly dead. Certainly, it is feasible to redo an Sony Xperia miro that has fallen in the water. To do this, it is needed to respect certain actions. People generally have bad reflexes and this is what can degrade the Sony Xperia miro. We will first discover the steps to be taken after the Sony Xperia miro has fallen into the water. We will discover in the second place the common errors that a good number of people make.
Steps to follow in cases where your Sony Xperia miro fell into the water
Whenever you want to restore your Sony Xperia miro in operating order, we suggest that you follow the steps below.
Do not try to turn the Sony Xperia miro back on after exiting the water
The very first thing to perform when the Sony Xperia miro has fallen into the water is to switch off the telephone. Certainly, in cases where it didn’t switch off, turn it off without doing any other manipulation. If perhaps it is already off, do not try to turn it back on for the moment. If perhaps the Sony Xperia miro is turned on and wet, you may produce a short circuit and therefore toast the telephone.
Remove detachable components
When the Sony Xperia miro is out of the water and turned off, it will have to be disassembled to the highest possible. This implies that it will probably be needed to take away the shell, the SIM card, the SD card and the battery if possible. When performed, put all of these items to dry and proceed to the following step.
Aspire the water that is in your Sony Xperia miro
Utilizing a straw, you have got to suck up the water that is contained in your Sony Xperia miro. For this, you just have to glue the straw over areas like buttons and vacuum. When you believe you have aspired all the water from your Sony Xperia miro, you will be able to start drying it.
Dry the Sony Xperia miro
The fourth step is to dry the telephone. For this, we recommend you to put it in front of a ventilator several hours. Avoid using solutions that cause the telephone to heat up or damage the telephone. When it is completed, we recommend you to leave the Sony Xperia miro in rice for 24 or 48 hours. The rice will therefore absorb the moisture that remains in the Sony Xperia miro.
Reassemble the components and turn on the Sony Xperia miro
When you have completed the previous steps, your Sony Xperia miro should be dry. So now you can make an attempt to turn on the Sony Xperia miro. If perhaps this doesn’t work, we recommend you to wait a couple of days or to bring the Sony Xperia miro to a repairman.
What should not be done in cases where the Sony Xperia miro has fallen into the water
You will find several stuff not to perform when ever your Sony Xperia miro has fallen into the water. The first is to make an attempt to turn the telephone back on just after. This can demolish the Sony Xperia miro. Next, it is strongly recommended not to use a heat source to dry the Sony Xperia miro. Without a doubt, techniques which include oven or hair dryer heat the components and may degrade them. At last, to get the water out of the telephone, do not shake it. Certainly, it could as well ruin the Sony Xperia miro.
