Whether in the wc or in a pool, it from time to time occurs that the Sony Xperia Go is dropped in the water. Nevertheless, it’s not because a mobile has fallen in the water that it is obviously dead. In truth, it is possible to redo an Sony Xperia Go that has fallen in the water. To accomplish this, it is required to respect particular actions. People typically have bad reflexes and this is what can damage the Sony Xperia Go. We will first discover the techniques to be taken after the Sony Xperia Go has fallen into the water. We will discover in the 2nd place the common errors that many people make.
Steps to follow if your Sony Xperia Go fell into the water
If perhaps you wish to restore your Sony Xperia Go in working order, we recommend that you follow the steps below.
Don’t try to turn the Sony Xperia Go back on after getting out the water
One thing to accomplish when the Sony Xperia Go has fallen into the water is to shut off the mobile. In truth, if it didn’t switch off, turn it off without doing any other tricks. In the event that it is already off, do not try to turn it back on for the moment. In the event that the Sony Xperia Go is switched on and wet, you can produce a short circuit and consequently toast the mobile.
Remove detachable components
When the Sony Xperia Go is out of the water and turned off, it will have to be disassembled to the maximum. Meaning that it will be required to take away the shell, the SIM card, the SD card and the battery if possible. When done, put all of these items to dry and proceed to the following step.
Aspire the water that is in your Sony Xperia Go
By using a straw, you need to suck up the water that is contained in your Sony Xperia Go. For this, you simply have to glue the straw over areas like buttons and vacuum. When you believe you have aspired all the water from your Sony Xperia Go, you will be able to start drying it.
Dry the Sony Xperia Go
The fourth step is to dry the mobile. For this, we advise you to put it in front of a ventilator a number of hours. Prevent using techniques that cause the mobile to heat up or damage the mobile. When it is completed, we advise you to leave the Sony Xperia Go in rice for 24 or 48 hours. The rice will consequently absorb the moisture that remains in the Sony Xperia Go.
Reassemble the components and turn on the Sony Xperia Go
When you have completed the prior steps, your Sony Xperia Go should be dry. So now you can make an attempt to turn on the Sony Xperia Go. If perhaps this doesn’t perform, we advise you to wait some days or to bring the Sony Xperia Go to a repairman.
What should not be done if the Sony Xperia Go has fallen into the water
There are a number of stuff not to accomplish when your Sony Xperia Go has fallen into the water. The first is to make an attempt to turn the mobile back on just after. This can kill the Sony Xperia Go. Following, it is strongly recommended not to use a heat source to dry the Sony Xperia Go. Indeed, techniques such as oven or hair dryer heat the components and may damage them. At last, to get the water out of the mobile, do not shake it. Certainly, it could also damage the Sony Xperia Go.
