Whether in the toilet or in a pool, it sometimes occurs that the SFR Startrail 6 Plus is dropped into the water. Even so, it is not because a mobile has fallen into the water that it is inevitably dead. In truth, it is possible to redo an SFR Startrail 6 Plus that has fallen into the water. To achieve this, it is essential to respect particular actions. People typically have bad reflexes and this is what can degrade the SFR Startrail 6 Plus. We will first of all see the steps to be taken after the SFR Startrail 6 Plus has fallen into the water. We will see in the secondary place the classical mistakes that many people make.
Methods to follow if your SFR Startrail 6 Plus fell into the water
Whenever you need to restore your SFR Startrail 6 Plus in operating order, we advise that you follow the steps listed below.
Don’t attempt to turn the SFR Startrail 6 Plus back on after exiting the water
The first thing to perform when the SFR Startrail 6 Plus has fallen into the water is to shut off the mobile. In truth, if it didn’t switch off, turn it off without doing any other manipulation. In cases where it is already off, do not attempt to turn it back on for the moment. In cases where the SFR Startrail 6 Plus is turned on and wet, you may generate a short circuit and consequently toast the mobile.
Remove detachable components
When the SFR Startrail 6 Plus is out of the water and turned off, it will have to be disassembled to the maximum. This means that it will be essential to take away the shell, the SIM card, the SD card and the battery if possible. When finished, put all of these items to dry and proceed to the next step.
Aspire the water that is in your SFR Startrail 6 Plus
Employing a straw, you will need to suck up the water that is contained in your SFR Startrail 6 Plus. For doing it, you simply need to glue the straw over areas like buttons and vacuum. When you think you have aspired all the water from your SFR Startrail 6 Plus, you will be able to start drying it.
Dry the SFR Startrail 6 Plus
The fourth step is to dry the mobile. For this, we advise you to put it in front of a ventilator a number of hours. Prevent using methods that cause the mobile to heat up or damage the mobile. When it is done, we advise you to leave the SFR Startrail 6 Plus in rice for 24 or 48 hours. The rice will consequently absorb the wetness that remains in the SFR Startrail 6 Plus.
Reassemble the components and turn on the SFR Startrail 6 Plus
When you have completed the previous steps, your SFR Startrail 6 Plus should be dry. So now you can try to turn on the SFR Startrail 6 Plus. In the event that this does not work, we advise you to hold out some days or to bring the SFR Startrail 6 Plus to a repairman.
What should not be done if the SFR Startrail 6 Plus has fallen into the water
There are a number of things not to perform when ever your SFR Startrail 6 Plus has fallen into the water. The first of all is to try to turn the mobile back on just after. This can destroy the SFR Startrail 6 Plus. Next, it is strongly recommended not to use a heat source to dry the SFR Startrail 6 Plus. Indeed, solutions such as oven or hair dryer heat the components and may degrade them. Finally, to get the water out of the mobile, do not shake it. Certainly, it could additionally ruin the SFR Startrail 6 Plus.
