Whether in the wc or in a swimming pool, it sometimes occurs that the Samsung Wave 2 is slipped into the water. Nonetheless, it is not because a mobile phone has fallen into the water that it’s unavoidably dead. Indeed, it is feasible to redo an Samsung Wave 2 that has fallen into the water. To accomplish this, it is important to respect certain steps. People frequently have bad reflexes and this is what can degrade the Samsung Wave 2. We will first discover the steps to be taken after the Samsung Wave 2 has fallen into the water. We will discover in the secondary place the common errors that most people make.
Steps to follow if your Samsung Wave 2 fell into the water
If you wish to restore your Samsung Wave 2 in working order, we recommend that you follow the steps listed below.
Don’t try to turn the Samsung Wave 2 back on after getting out the water
The first thing to accomplish when the Samsung Wave 2 has fallen into the water is to switch off the mobile phone. Indeed, if it didn’t turn off, turn it off without doing any other tricks. If it is already off, do not try to turn it back on for the moment. If the Samsung Wave 2 is started and wet, you might create a short circuit and therefore toast the mobile phone.
Remove detachable components
Once the Samsung Wave 2 is out of the water and turned off, it will have to be disassembled to the highest possible. Meaning that it will be important to take out the shell, the SIM card, the SD card and the battery if possible. Once performed, put all of these items to dry and proceed to the next step.
Aspire the water that is in your Samsung Wave 2
Using a straw, you need to suck up the water that is contained in your Samsung Wave 2. For this, you simply have to glue the straw over areas like buttons and vacuum. Once you believe you have aspired all the water from your Samsung Wave 2, you will have the capacity to start drying it.
Dry the Samsung Wave 2
The fourth step is to dry the mobile phone. For this, we recommend you to put it in front of a ventilator a number of hours. Prevent using méthodes that cause the mobile phone to heat up or damage the mobile phone. Once it is finished, we recommend you to leave the Samsung Wave 2 in rice for 24 or 48 hours. The rice will therefore absorb the moisture that remains in the Samsung Wave 2.
Reassemble the components and turn on the Samsung Wave 2
When you have completed the previous steps, your Samsung Wave 2 should be dry. So now you can try to turn on the Samsung Wave 2. In the event that this doesn’t do the job, we recommend you to wait a couple of days or to bring the Samsung Wave 2 to a repairman.
What should not be done if the Samsung Wave 2 has fallen into the water
You will find a number of things not to accomplish when your Samsung Wave 2 has fallen into the water. The first is to try to turn the mobile phone back on just after. This can kill the Samsung Wave 2. Following, it is highly recommended not to use a heat source to dry the Samsung Wave 2. Without a doubt, solutions which include oven or hair dryer heat the components and may degrade them. At last, to get the water out of the mobile phone, do not shake it. Indeed, it could as well damage the Samsung Wave 2.
