Whether in the wc or in a swimming pool, it from time to time happens that the Polaroid Pro 4611 is slipped in the water. Nonetheless, it is not because a cellphone has fallen in the water that it’s undoubtedly dead. Indeed, it is possible to redo an Polaroid Pro 4611 that has fallen in the water. To achieve this, it is important to respect specific steps. People often have bad reflexes and this is what can damage the Polaroid Pro 4611. We will 1st discover the steps to be taken after the Polaroid Pro 4611 has fallen into the water. We will discover in the 2nd place the common mistakes that the majority of people make.
Methods to follow if your Polaroid Pro 4611 fell into the water
If perhaps you wish to restore your Polaroid Pro 4611 in operating order, we advise that you follow the steps below.
Don’t try to turn the Polaroid Pro 4611 back on after getting out the water
The first thing to do when the Polaroid Pro 4611 has fallen into the water is to turn off the cellphone. Indeed, if it did not turn off, turn it off without doing any other tricks. If perhaps it is already off, do not try to turn it back on for the moment. If perhaps the Polaroid Pro 4611 is started and wet, you could create a short circuit and as a result toast the cellphone.
Remove detachable components
Once the Polaroid Pro 4611 is out of the water and turned off, it will have to be disassembled to the highest possible. This means that it will be important to take out the shell, the SIM card, the SD card and the electric battery if possible. Once carried out, put all of these items to dry and proceed to the next step.
Aspire the water that is in your Polaroid Pro 4611
Utilizing a straw, you need to suck up the water that is contained in your Polaroid Pro 4611. For this, you only have to glue the straw over areas like buttons and vacuum. Once you believe you have aspired all the water from your Polaroid Pro 4611, you will be ready to start drying it.
Dry the Polaroid Pro 4611
The fourth step is to dry the cellphone. For this, we recommend you to put it in front of a ventilator a number of hours. Prevent using solutions that cause the cellphone to heat up or damage the cellphone. Once it is performed, we recommend you to leave the Polaroid Pro 4611 in rice for 24 or 48 hours. The rice will as a result absorb the moisture that stays in the Polaroid Pro 4611.
Reassemble the components and turn on the Polaroid Pro 4611
When you have completed the prior steps, your Polaroid Pro 4611 should be dry. So now you can make an attempt to turn on the Polaroid Pro 4611. If this does not function, we recommend you to wait a couple of days or to bring the Polaroid Pro 4611 to a repairshop.
What should not be done if the Polaroid Pro 4611 has fallen into the water
You will find a number of stuff not to do when your Polaroid Pro 4611 has fallen into the water. The 1st is to make an attempt to turn the cellphone back on just after. This can kill the Polaroid Pro 4611. Following, it is highly recommended not to use a heat source to dry the Polaroid Pro 4611. Without a doubt, methods which include oven or hair dryer heat the components and may damage them. Finally, to get the water out of the cellphone, do not shake it. Indeed, it could as well damage the Polaroid Pro 4611.
