How to fix a water damaged on Polaroid LINK A6

Whether in the toilet or in a swimming pool, it occasionally occurs that the Polaroid LINK A6 is slipped into the water. Nevertheless, it isn’t because a telephone has fallen into the water that it’s inevitably dead. In fact, it is possible to redo an Polaroid LINK A6 that has fallen into the water. To accomplish this, it is important to respect certain actions. People generally have bad reflexes and this is what can deteriorate the Polaroid LINK A6. We will first of all see the methods to be taken after the Polaroid LINK A6 has fallen into the water. We will see in the 2nd place the classical errors that a good number of people make.water-damaged-Polaroid-LINK-A6

Methods to follow if perhaps your Polaroid LINK A6 fell into the water

Whenever you need to recover your Polaroid LINK A6 in operating order, we recommend that you follow the steps below.

Don’t try to turn the Polaroid LINK A6 back on after exiting the water

One thing to do when the Polaroid LINK A6 has fallen into the water is to turn off the telephone. In fact, if perhaps it didn’t switch off, turn it off without doing any other tricks. In the event that it is already off, do not try to turn it back on for the moment. In the event that the Polaroid LINK A6 is started and wet, you may create a short circuit and consequently toast the telephone.

Remove detachable components

When the Polaroid LINK A6 is out of the water and switched off, it will have to be disassembled to the maximum. This means that it will probably be important to remove the shell, the SIM card, the SD card and the battery if possible. When finished, put all of these things to dry and continue to the following step.

Aspire the water that is in your Polaroid LINK A6

Utilizing a straw, you will need to suck up the water that is contained in your Polaroid LINK A6. For this, you just need to glue the straw over areas like buttons and vacuum. When you believe you have aspired all the water from your Polaroid LINK A6, you will have the ability to start drying it.

Dry the Polaroid LINK A6

The fourth step is to dry the telephone. For this, we advise you to put it in front of a ventilator a number of hours. Prevent using méthodes that cause the telephone to heat up or damage the telephone. When it is finished, we advise you to leave the Polaroid LINK A6 in rice for 24 or 48 hours. The rice will consequently absorb the moisture that remains in the Polaroid LINK A6.

Reassemble the components and turn on the Polaroid LINK A6

When you have completed the prior steps, your Polaroid LINK A6 should be dry. So now you can try to turn on the Polaroid LINK A6. In the event that this does not work, we advise you to hold out a few days or to bring the Polaroid LINK A6 to a repairman.

What should not be done if perhaps the Polaroid LINK A6 has fallen into the water

There are a number of things not to do when ever your Polaroid LINK A6 has fallen into the water. The first of all is to try to turn the telephone back on just after. This can kill the Polaroid LINK A6. Next, it is strongly advised not to use a heat source to dry the Polaroid LINK A6. In fact, solutions which include oven or hair dryer heat the components and may deteriorate them. Finally, to get the water out of the telephone, do not shake it. In fact, it could likewise damage the Polaroid LINK A6.