Whether in the toilet or in a pool, it sometimes occurs that the Polaroid Agate Pro V400 is dropped in the water. Nonetheless, it’s not because a telephone has fallen in the water that it is obviously dead. In truth, it is possible to redo an Polaroid Agate Pro V400 that has fallen in the water. To achieve this, it is required to respect particular steps. People often have bad reflexes and this is what can deteriorate the Polaroid Agate Pro V400. We will first discover the steps to be taken after the Polaroid Agate Pro V400 has fallen into the water. We will discover in the second place the common mistakes that a good number of people make.
Methods to follow if your Polaroid Agate Pro V400 fell into the water
In the event that you need to recover your Polaroid Agate Pro V400 in operating order, we suggest that you follow the steps below.
Don’t try to turn the Polaroid Agate Pro V400 back on after getting out the water
The very first thing to do when the Polaroid Agate Pro V400 has fallen into the water is to shut off the telephone. In truth, if it did not switch off, turn it off without doing any other manipulation. In cases where it is already off, do not try to turn it back on for the moment. In cases where the Polaroid Agate Pro V400 is switched on and wet, you may make a short circuit and consequently toast the telephone.
Remove detachable components
When the Polaroid Agate Pro V400 is out of the water and switched off, it will have to be disassembled to the highest possible. This means that it’ll be required to take out the shell, the SIM card, the SD card and the electric battery if possible. When carried out, put all of these items to dry and proceed to the following step.
Aspire the water that is in your Polaroid Agate Pro V400
Using a straw, you will need to suck up the water that is contained in your Polaroid Agate Pro V400. For doing it, you only have to glue the straw over areas like buttons and vacuum. When you believe you have aspired all the water from your Polaroid Agate Pro V400, you will have the capacity to start drying it.
Dry the Polaroid Agate Pro V400
The fourth step is to dry the telephone. For this, we advise you to put it in front of a ventilator a number of hours. Avoid using solutions that cause the telephone to heat up or damage the telephone. When it is finished, we advise you to leave the Polaroid Agate Pro V400 in rice for 24 or 48 hours. The rice will consequently absorb the moisture that remains in the Polaroid Agate Pro V400.
Reassemble the components and turn on the Polaroid Agate Pro V400
When you have completed the prior steps, your Polaroid Agate Pro V400 should be dry. So now you can make an attempt to turn on the Polaroid Agate Pro V400. If this does not do the job, we advise you to wait some days or to bring the Polaroid Agate Pro V400 to a repairshop.
What should not be done if the Polaroid Agate Pro V400 has fallen into the water
You will find a number of points not to do when your Polaroid Agate Pro V400 has fallen into the water. The first is to make an attempt to turn the telephone back on just after. This can kill the Polaroid Agate Pro V400. Following, it is highly suggested not to use a heat source to dry the Polaroid Agate Pro V400. Certainly, solutions which include oven or hair dryer heat the components and may deteriorate them. At last, to get the water out of the telephone, do not shake it. In fact, it could additionally ruin the Polaroid Agate Pro V400.
