How to fix a water damaged on Phone Pro

Whether in the toilet or in a pool, it sometimes happens that the Phone Pro is dropped in the water. Nevertheless, it’s not because a telephone has fallen in the water that it is undoubtedly dead. In fact, it is feasible to redo an Phone Pro that has fallen in the water. To do this, it is required to respect certain steps. People generally have bad reflexes and this is what can degrade the Phone Pro. We will first see the methods to be taken after the Phone Pro has fallen into the water. We will see in the 2nd place the common errors that many people make.water-damaged-Phone-Pro

Methods to follow in cases where your Phone Pro fell into the water

In the event that you need to restore your Phone Pro in operating order, we suggest that you follow the steps listed below.

Do not try to turn the Phone Pro back on after exiting the water

One thing to do when the Phone Pro has fallen into the water is to shut off the telephone. In fact, in cases where it did not turn off, turn it off without doing any other manipulation. In cases where it is already off, do not try to turn it back on for the moment. In cases where the Phone Pro is switched on and wet, you could generate a short circuit and as a result toast the telephone.

Remove detachable components

Once the Phone Pro is out of the water and turned off, it will have to be disassembled to the maximum. Meaning that it will probably be required to take away the shell, the SIM card, the SD card and the electric battery if possible. Once completed, put all of these things to dry and proceed to the next step.

Aspire the water that is in your Phone Pro

Utilizing a straw, you will need to suck up the water that is contained in your Phone Pro. For doing it, you just have to glue the straw over areas like buttons and vacuum. Once you believe you have aspired all the water from your Phone Pro, you will have the capacity to start drying it.

Dry the Phone Pro

The fourth step is to dry the telephone. For this, we suggest you to put it in front of a ventilator several hours. Prevent using solutions that cause the telephone to heat up or damage the telephone. Once it is done, we suggest you to leave the Phone Pro in rice for 24 or 48 hours. The rice will as a result absorb the wetness that remains in the Phone Pro.

Reassemble the components and turn on the Phone Pro

When you have completed the prior steps, your Phone Pro should be dry. So now you can make an attempt to turn on the Phone Pro. If this does not perform, we suggest you to hold out a few days or to bring the Phone Pro to a repairman.

What should not be done in cases where the Phone Pro has fallen into the water

There are several things not to do when your Phone Pro has fallen into the water. The first is to make an attempt to turn the telephone back on just after. This can destroy the Phone Pro. Following, it is strongly recommended not to use a heat source to dry the Phone Pro. Without a doubt, techniques such as oven or hair dryer heat the components and may degrade them. Finally, to get the water out of the telephone, do not shake it. In fact, it could also ruin the Phone Pro.