Whether in the wc or in a swimming pool, it from time to time happens that the Oukitel U10 is slipped in the water. Nevertheless, it’s not because a telephone has fallen in the water that it is undoubtedly dead. In truth, it is possible to redo an Oukitel U10 that has fallen in the water. To achieve this, it is required to respect certain steps. People generally have bad reflexes and this is what can degrade the Oukitel U10. We will 1st see the steps to be taken after the Oukitel U10 has fallen into the water. We will see in the second place the classical errors that the majority of people make.
Steps to follow if perhaps your Oukitel U10 fell into the water
If you need to restore your Oukitel U10 in operating order, we highly recommend that you follow the steps listed below.
Don’t attempt to turn the Oukitel U10 back on after exiting the water
One thing to do when the Oukitel U10 has fallen into the water is to turn off the telephone. In truth, if perhaps it did not turn off, turn it off without doing any other manipulation. If it is already off, do not attempt to turn it back on for the moment. If the Oukitel U10 is started and wet, you could produce a short circuit and as a result toast the telephone.
Remove detachable components
Once the Oukitel U10 is out of the water and switched off, it will have to be disassembled to the highest possible. Meaning that it will probably be required to remove the shell, the SIM card, the SD card and the battery if possible. Once completed, put all of these things to dry and continue to the next step.
Aspire the water that is in your Oukitel U10
Using a straw, you will need to suck up the water that is contained in your Oukitel U10. For doing it, you merely need to glue the straw over areas like buttons and vacuum. Once you believe you have aspired all the water from your Oukitel U10, you will be ready to start drying it.
Dry the Oukitel U10
The fourth step is to dry the telephone. For this, we advise you to put it in front of a ventilator a number of hours. Avoid using méthodes that cause the telephone to heat up or damage the telephone. Once it is completed, we advise you to leave the Oukitel U10 in rice for 24 or 48 hours. The rice will as a result absorb the wetness that remains in the Oukitel U10.
Reassemble the components and turn on the Oukitel U10
When you have completed the prior steps, your Oukitel U10 should be dry. So now you can try to turn on the Oukitel U10. If this does not function, we advise you to hold out a couple of days or to bring the Oukitel U10 to a repairman.
What should not be done if perhaps the Oukitel U10 has fallen into the water
There are a number of points not to do when ever your Oukitel U10 has fallen into the water. The 1st is to try to turn the telephone back on just after. This can kill the Oukitel U10. Next, it is highly suggested not to use a heat source to dry the Oukitel U10. Indeed, techniques such as oven or hair dryer heat the components and may degrade them. Finally, to get the water out of the telephone, do not shake it. In fact, it could also damage the Oukitel U10.
