Whether in the toilet or in a swimming pool, it occasionally occurs that the Nokia Lumia 620 is slipped in the water. However, it isn’t because a phone has fallen in the water that it’s undoubtedly dead. Certainly, it is possible to redo an Nokia Lumia 620 that has fallen in the water. To achieve this, it is required to respect certain actions. People typically have bad reflexes and this is what can damage the Nokia Lumia 620. We will 1st see the steps to be taken after the Nokia Lumia 620 has fallen into the water. We will see in the second place the classical errors that a good number of people make.
Methods to follow in cases where your Nokia Lumia 620 fell into the water
In the event that you want to restore your Nokia Lumia 620 in working order, we advise that you follow the steps below.
Don’t try to turn the Nokia Lumia 620 back on after getting out the water
The first thing to perform when the Nokia Lumia 620 has fallen into the water is to switch off the phone. Certainly, in cases where it did not turn off, turn it off without doing any other manipulation. If it is already off, do not try to turn it back on for the moment. If the Nokia Lumia 620 is started and wet, you could make a short circuit and consequently toast the phone.
Remove detachable components
When the Nokia Lumia 620 is out of the water and switched off, it will have to be disassembled to the highest possible. Meaning that it will be required to take out the shell, the SIM card, the SD card and the electric battery if possible. When carried out, put all of these things to dry and proceed to the following step.
Aspire the water that is in your Nokia Lumia 620
Using a straw, you must suck up the water that is contained in your Nokia Lumia 620. For this, you only need to glue the straw over areas like buttons and vacuum. When you believe you have aspired all the water from your Nokia Lumia 620, you will have the capacity to start drying it.
Dry the Nokia Lumia 620
The fourth step is to dry the phone. For this, we advise you to put it in front of a ventilator several hours. Prevent using solutions that cause the phone to heat up or damage the phone. When it is performed, we advise you to leave the Nokia Lumia 620 in rice for 24 or 48 hours. The rice will consequently absorb the wetness that stays in the Nokia Lumia 620.
Reassemble the components and turn on the Nokia Lumia 620
When you have completed the previous steps, your Nokia Lumia 620 should be dry. So now you can try to turn on the Nokia Lumia 620. If perhaps this doesn’t work, we advise you to hang on some days or to bring the Nokia Lumia 620 to a repairshop.
What should not be done in cases where the Nokia Lumia 620 has fallen into the water
There are several stuff not to perform when your Nokia Lumia 620 has fallen into the water. The 1st is to try to turn the phone back on just after. This can kill the Nokia Lumia 620. Following, it is strongly suggested not to use a heat source to dry the Nokia Lumia 620. In fact, solutions such as oven or hair dryer heat the components and may damage them. At last, to get the water out of the phone, do not shake it. Certainly, it could additionally damage the Nokia Lumia 620.
