Whether in the wc or in a swimming pool, it from time to time happens that the Nokia 500 is slipped into the water. On the other hand, it is not because a mobile has fallen into the water that it is undoubtedly dead. In fact, it is possible to redo an Nokia 500 that has fallen into the water. To achieve this, it is essential to respect certain actions. People generally have bad reflexes and this is what can deteriorate the Nokia 500. We will first of all see the techniques to be taken after the Nokia 500 has fallen into the water. We will see in the secondary place the common mistakes that the majority of people make.
Methods to follow in cases where your Nokia 500 fell into the water
If you need to restore your Nokia 500 in operating order, we suggest that you follow the steps listed below.
Do not attempt to turn the Nokia 500 back on after exiting the water
One thing to accomplish when the Nokia 500 has fallen into the water is to shut off the mobile. In fact, in cases where it didn’t switch off, turn it off without doing any other manipulation. If it is already off, do not attempt to turn it back on for the moment. If the Nokia 500 is switched on and wet, you may produce a short circuit and consequently toast the mobile.
Remove detachable components
Once the Nokia 500 is out of the water and switched off, it will have to be disassembled to the maximum. This means that it’ll be essential to remove the shell, the SIM card, the SD card and the electric battery if possible. Once carried out, put all of these things to dry and continue to the following step.
Aspire the water that is in your Nokia 500
Employing a straw, you will need to suck up the water that is contained in your Nokia 500. For doing it, you simply need to glue the straw over areas like buttons and vacuum. Once you think you have aspired all the water from your Nokia 500, you will be ready to start drying it.
Dry the Nokia 500
The fourth step is to dry the mobile. For this, we suggest you to put it in front of a ventilator a number of hours. Prevent using techniques that cause the mobile to heat up or damage the mobile. Once it is completed, we suggest you to leave the Nokia 500 in rice for 24 or 48 hours. The rice will consequently absorb the wetness that stays in the Nokia 500.
Reassemble the components and turn on the Nokia 500
When you have completed the previous steps, your Nokia 500 should be dry. So now you can try to turn on the Nokia 500. If perhaps this doesn’t work, we suggest you to hang on a couple of days or to bring the Nokia 500 to a repairshop.
What should not be done in cases where the Nokia 500 has fallen into the water
There are a number of stuff not to accomplish when ever your Nokia 500 has fallen into the water. The first of all is to try to turn the mobile back on just after. This can kill the Nokia 500. Following, it is highly recommended not to use a heat source to dry the Nokia 500. Without a doubt, solutions which include oven or hair dryer heat the components and may deteriorate them. Finally, to get the water out of the mobile, do not shake it. In fact, it could also damage the Nokia 500.
