How to fix a water damaged on Motorola Motoluxe

Whether in the toilet or in a pool, it from time to time occurs that the Motorola Motoluxe is slipped in the water. Nonetheless, it’s not because a phone has fallen in the water that it is obviously dead. In truth, it is feasible to redo an Motorola Motoluxe that has fallen in the water. To get this done, it is required to respect particular actions. People generally have bad reflexes and this is what can degrade the Motorola Motoluxe. We will first see the methods to be taken after the Motorola Motoluxe has fallen into the water. We will see in the secondary place the common mistakes that a large number of people make.water-damaged-Motorola-Motoluxe

Methods to follow if your Motorola Motoluxe fell into the water

In the event that you desire to restore your Motorola Motoluxe in working order, we recommend that you follow the steps listed below.

Don’t attempt to turn the Motorola Motoluxe back on after exiting the water

One thing to do when the Motorola Motoluxe has fallen into the water is to switch off the phone. In truth, if it did not turn off, turn it off without doing any other tricks. If perhaps it is already off, do not attempt to turn it back on for the moment. If perhaps the Motorola Motoluxe is turned on and wet, you could generate a short circuit and consequently toast the phone.

Remove detachable components

When the Motorola Motoluxe is out of the water and switched off, it will have to be disassembled to the maximum. This means that it will probably be required to take away the shell, the SIM card, the SD card and the battery if possible. When finished, put all of these things to dry and proceed to the next step.

Aspire the water that is in your Motorola Motoluxe

Utilizing a straw, you must suck up the water that is contained in your Motorola Motoluxe. For this, you merely have to glue the straw over areas like buttons and vacuum. When you believe you have aspired all the water from your Motorola Motoluxe, you will have the capacity to start drying it.

Dry the Motorola Motoluxe

The fourth step is to dry the phone. For this, we advise you to put it in front of a ventilator several hours. Prevent using techniques that cause the phone to heat up or damage the phone. When it is completed, we advise you to leave the Motorola Motoluxe in rice for 24 or 48 hours. The rice will consequently absorb the wetness that remains in the Motorola Motoluxe.

Reassemble the components and turn on the Motorola Motoluxe

When you have completed the previous steps, your Motorola Motoluxe should be dry. So now you can try to turn on the Motorola Motoluxe. In the event that this doesn’t work, we advise you to hang on a few days or to bring the Motorola Motoluxe to a repairshop.

What should not be done if the Motorola Motoluxe has fallen into the water

There are several stuff not to do when ever your Motorola Motoluxe has fallen into the water. The first is to try to turn the phone back on just after. This can demolish the Motorola Motoluxe. Following, it is strongly recommended not to use a heat source to dry the Motorola Motoluxe. Indeed, techniques which include oven or hair dryer heat the components and may degrade them. Finally, to get the water out of the phone, do not shake it. Indeed, it could additionally damage the Motorola Motoluxe.