Whether in the wc or in a swimming pool, it from time to time occurs that the Motorola Moto E4 is dropped in the water. However, it isn’t because a mobile phone has fallen in the water that it’s obviously dead. Certainly, it is possible to redo an Motorola Moto E4 that has fallen in the water. To get this done, it is required to respect particular steps. People frequently have bad reflexes and this is what can degrade the Motorola Moto E4. We will first see the steps to be taken after the Motorola Moto E4 has fallen into the water. We will see in the second place the classical mistakes that many people make.
Steps to follow in the event that your Motorola Moto E4 fell into the water
If you desire to restore your Motorola Moto E4 in operating order, we recommend that you follow the steps listed below.
Do not try to turn the Motorola Moto E4 back on after exiting the water
One thing to perform when the Motorola Moto E4 has fallen into the water is to turn off the mobile phone. Certainly, in the event that it didn’t switch off, turn it off without doing any other tricks. In the event that it is already off, do not try to turn it back on for the moment. In the event that the Motorola Moto E4 is started and wet, you might generate a short circuit and consequently toast the mobile phone.
Remove detachable components
Once the Motorola Moto E4 is out of the water and turned off, it will have to be disassembled to the maximum. This means that it will probably be required to take out the shell, the SIM card, the SD card and the battery if possible. Once done, put all of these things to dry and proceed to the next step.
Aspire the water that is in your Motorola Moto E4
Utilizing a straw, you need to suck up the water that is contained in your Motorola Moto E4. For doing it, you just need to glue the straw over areas like buttons and vacuum. Once you think you have aspired all the water from your Motorola Moto E4, you will have the ability to start drying it.
Dry the Motorola Moto E4
The fourth step is to dry the mobile phone. For this, we advise you to put it in front of a ventilator a number of hours. Avoid using techniques that cause the mobile phone to heat up or damage the mobile phone. Once it is performed, we advise you to leave the Motorola Moto E4 in rice for 24 or 48 hours. The rice will consequently absorb the moisture that stays in the Motorola Moto E4.
Reassemble the components and turn on the Motorola Moto E4
When you have completed the prior steps, your Motorola Moto E4 should be dry. So now you can try to turn on the Motorola Moto E4. In the event that this does not work, we advise you to hold out a few days or to bring the Motorola Moto E4 to a repairshop.
What should not be done in the event that the Motorola Moto E4 has fallen into the water
You will find a number of points not to perform when ever your Motorola Moto E4 has fallen into the water. The first is to try to turn the mobile phone back on just after. This can kill the Motorola Moto E4. Next, it is highly advised not to use a heat source to dry the Motorola Moto E4. In fact, techniques such as oven or hair dryer heat the components and may degrade them. Finally, to get the water out of the mobile phone, do not shake it. Certainly, it could as well ruin the Motorola Moto E4.
