Whether in the wc or in a pool, it occasionally occurs that the Motorola Moto E is dropped in the water. However, it is not because a phone has fallen in the water that it’s obviously dead. Indeed, it is possible to redo an Motorola Moto E that has fallen in the water. To accomplish this, it is essential to respect specific steps. People generally have bad reflexes and this is what can damage the Motorola Moto E. We will first see the steps to be taken after the Motorola Moto E has fallen into the water. We will see in the second place the classical errors that most people make.
Methods to follow in the event that your Motorola Moto E fell into the water
If perhaps you wish to recover your Motorola Moto E in working order, we advise that you follow the steps below.
Do not attempt to turn the Motorola Moto E back on after exiting the water
The first thing to do when the Motorola Moto E has fallen into the water is to shut off the phone. Indeed, in the event that it didn’t turn off, turn it off without doing any other tricks. If it is already off, do not attempt to turn it back on for the moment. If the Motorola Moto E is switched on and wet, you could create a short circuit and consequently toast the phone.
Remove detachable components
Once the Motorola Moto E is out of the water and switched off, it will have to be disassembled to the maximum. Meaning that it’ll be essential to remove the shell, the SIM card, the SD card and the electric battery if possible. Once done, put all of these items to dry and proceed to the following step.
Aspire the water that is in your Motorola Moto E
Utilizing a straw, you will need to suck up the water that is contained in your Motorola Moto E. For this, you merely have to glue the straw over areas like buttons and vacuum. Once you think you have aspired all the water from your Motorola Moto E, you will have the capacity to start drying it.
Dry the Motorola Moto E
The fourth step is to dry the phone. For this, we suggest you to put it in front of a ventilator a number of hours. Avoid using techniques that cause the phone to heat up or damage the phone. Once it is finished, we suggest you to leave the Motorola Moto E in rice for 24 or 48 hours. The rice will consequently absorb the wetness that remains in the Motorola Moto E.
Reassemble the components and turn on the Motorola Moto E
When you have completed the prior steps, your Motorola Moto E should be dry. So now you can make an attempt to turn on the Motorola Moto E. In the event that this does not work, we suggest you to wait some days or to bring the Motorola Moto E to a repairman.
What should not be done in the event that the Motorola Moto E has fallen into the water
You will find a number of things not to do when your Motorola Moto E has fallen into the water. The first is to make an attempt to turn the phone back on just after. This can destroy the Motorola Moto E. Next, it is strongly recommended not to use a heat source to dry the Motorola Moto E. Indeed, techniques such as oven or hair dryer heat the components and may damage them. At last, to get the water out of the phone, do not shake it. In fact, it could likewise ruin the Motorola Moto E.
