Whether in the wc or in a swimming pool, it from time to time occurs that the Motorola Moto C is slipped into the water. Nevertheless, it’s not because a telephone has fallen into the water that it’s unavoidably dead. Indeed, it is feasible to redo an Motorola Moto C that has fallen into the water. To achieve this, it is required to respect specific steps. People frequently have bad reflexes and this is what can degrade the Motorola Moto C. We will 1st see the techniques to be taken after the Motorola Moto C has fallen into the water. We will see in the second place the common errors that a large number of people make.
Steps to follow in the event that your Motorola Moto C fell into the water
In the event that you wish to restore your Motorola Moto C in working order, we highly recommend that you follow the steps below.
Don’t attempt to turn the Motorola Moto C back on after getting out the water
The first thing to do when the Motorola Moto C has fallen into the water is to turn off the telephone. Indeed, in the event that it did not turn off, turn it off without doing any other manipulation. In cases where it is already off, do not attempt to turn it back on for the moment. In cases where the Motorola Moto C is turned on and wet, you might produce a short circuit and therefore toast the telephone.
Remove detachable components
Once the Motorola Moto C is out of the water and turned off, it will have to be disassembled to the maximum. This means that it will be required to take out the shell, the SIM card, the SD card and the battery if possible. Once performed, put all of these things to dry and continue to the next step.
Aspire the water that is in your Motorola Moto C
Using a straw, you have got to suck up the water that is contained in your Motorola Moto C. For doing it, you simply have to glue the straw over areas like buttons and vacuum. Once you think you have aspired all the water from your Motorola Moto C, you will have the ability to start drying it.
Dry the Motorola Moto C
The fourth step is to dry the telephone. For this, we advise you to put it in front of a ventilator several hours. Prevent using methods that cause the telephone to heat up or damage the telephone. Once it is performed, we advise you to leave the Motorola Moto C in rice for 24 or 48 hours. The rice will therefore absorb the wetness that remains in the Motorola Moto C.
Reassemble the components and turn on the Motorola Moto C
When you have completed the prior steps, your Motorola Moto C should be dry. So now you can try to turn on the Motorola Moto C. If perhaps this does not perform, we advise you to wait a few days or to bring the Motorola Moto C to a repairshop.
What should not be done in the event that the Motorola Moto C has fallen into the water
There are several stuff not to do when your Motorola Moto C has fallen into the water. The 1st is to try to turn the telephone back on just after. This can kill the Motorola Moto C. Following, it is highly advised not to use a heat source to dry the Motorola Moto C. Without a doubt, methods such as oven or hair dryer heat the components and may degrade them. At last, to get the water out of the telephone, do not shake it. In fact, it could likewise damage the Motorola Moto C.
