Whether in the toilet or in a swimming pool, it from time to time happens that the Motorola DROID Maxx is slipped into the water. Even so, it isn’t simply because a mobile phone has fallen into the water that it’s inevitably dead. Indeed, it is feasible to redo an Motorola DROID Maxx that has fallen into the water. To get this done, it is needed to respect certain steps. People generally have bad reflexes and this is what can damage the Motorola DROID Maxx. We will 1st discover the steps to be taken after the Motorola DROID Maxx has fallen into the water. We will discover in the 2nd place the common mistakes that a large number of people make.
Steps to follow if perhaps your Motorola DROID Maxx fell into the water
If you want to recover your Motorola DROID Maxx in working order, we advise that you follow the steps listed below.
Don’t attempt to turn the Motorola DROID Maxx back on after getting out the water
The first thing to accomplish when the Motorola DROID Maxx has fallen into the water is to shut off the mobile phone. Indeed, if perhaps it didn’t switch off, turn it off without doing any other tricks. If perhaps it is already off, do not attempt to turn it back on for the moment. If perhaps the Motorola DROID Maxx is switched on and wet, you can create a short circuit and therefore toast the mobile phone.
Remove detachable components
When the Motorola DROID Maxx is out of the water and switched off, it will have to be disassembled to the highest possible. Meaning that it will be needed to take out the shell, the SIM card, the SD card and the battery if possible. When finished, put all of these items to dry and proceed to the following step.
Aspire the water that is in your Motorola DROID Maxx
Employing a straw, you must suck up the water that is contained in your Motorola DROID Maxx. For this, you just need to glue the straw over areas like buttons and vacuum. When you think you have aspired all the water from your Motorola DROID Maxx, you will have the capacity to start drying it.
Dry the Motorola DROID Maxx
The fourth step is to dry the mobile phone. For this, we advise you to put it in front of a ventilator several hours. Avoid using méthodes that cause the mobile phone to heat up or damage the mobile phone. When it is completed, we advise you to leave the Motorola DROID Maxx in rice for 24 or 48 hours. The rice will therefore absorb the moisture that remains in the Motorola DROID Maxx.
Reassemble the components and turn on the Motorola DROID Maxx
When you have completed the previous steps, your Motorola DROID Maxx should be dry. So now you can make an attempt to turn on the Motorola DROID Maxx. If this does not perform, we advise you to wait a few days or to bring the Motorola DROID Maxx to a repairshop.
What should not be done if perhaps the Motorola DROID Maxx has fallen into the water
There are several stuff not to accomplish when your Motorola DROID Maxx has fallen into the water. The 1st is to make an attempt to turn the mobile phone back on just after. This can destroy the Motorola DROID Maxx. Next, it is highly recommended not to use a heat source to dry the Motorola DROID Maxx. Certainly, techniques which include oven or hair dryer heat the components and may damage them. Finally, to get the water out of the mobile phone, do not shake it. Certainly, it could additionally ruin the Motorola DROID Maxx.
