Whether in the wc or in a swimming pool, it occasionally happens that the Moto Z is dropped into the water. Nevertheless, it isn’t simply because a mobile phone has fallen into the water that it’s unavoidably dead. In truth, it is possible to redo an Moto Z that has fallen into the water. To do this, it is needed to respect particular actions. People generally have bad reflexes and this is what can deteriorate the Moto Z. We will 1st see the methods to be taken after the Moto Z has fallen into the water. We will see in the secondary place the classical mistakes that the majority of people make.
Steps to follow in cases where your Moto Z fell into the water
If you wish to recover your Moto Z in operating order, we recommend that you follow the steps below.
Don’t attempt to turn the Moto Z back on after getting out the water
The first thing to perform when the Moto Z has fallen into the water is to turn off the mobile phone. In truth, in cases where it didn’t turn off, turn it off without doing any other tricks. In the event that it is already off, do not attempt to turn it back on for the moment. In the event that the Moto Z is turned on and wet, you might make a short circuit and consequently toast the mobile phone.
Remove detachable components
When the Moto Z is out of the water and turned off, it will have to be disassembled to the maximum. This means that it will probably be needed to take out the shell, the SIM card, the SD card and the battery if possible. When carried out, put all of these items to dry and proceed to the next step.
Aspire the water that is in your Moto Z
Utilizing a straw, you will have to suck up the water that is contained in your Moto Z. For this, you only have to glue the straw over areas like buttons and vacuum. When you think you have aspired all the water from your Moto Z, you will have the capacity to start drying it.
Dry the Moto Z
The fourth step is to dry the mobile phone. For this, we advise you to put it in front of a ventilator a number of hours. Prevent using techniques that cause the mobile phone to heat up or damage the mobile phone. When it is completed, we advise you to leave the Moto Z in rice for 24 or 48 hours. The rice will consequently absorb the moisture that stays in the Moto Z.
Reassemble the components and turn on the Moto Z
When you have completed the prior steps, your Moto Z should be dry. So now you can try to turn on the Moto Z. If perhaps this doesn’t do the job, we advise you to wait a few days or to bring the Moto Z to a repairman.
What should not be done in cases where the Moto Z has fallen into the water
You will find a number of things not to perform when ever your Moto Z has fallen into the water. The 1st is to try to turn the mobile phone back on just after. This can demolish the Moto Z. Following, it is strongly advised not to use a heat source to dry the Moto Z. Without a doubt, methods which include oven or hair dryer heat the components and may deteriorate them. At last, to get the water out of the mobile phone, do not shake it. In fact, it could as well damage the Moto Z.
