Whether in the wc or in a swimming pool, it from time to time happens that the Moto G6 is dropped in the water. However, it isn’t simply because a phone has fallen in the water that it’s inevitably dead. Certainly, it is possible to redo an Moto G6 that has fallen in the water. To achieve this, it is important to respect particular steps. People typically have bad reflexes and this is what can deteriorate the Moto G6. We will first of all discover the techniques to be taken after the Moto G6 has fallen into the water. We will discover in the secondary place the classical mistakes that a good number of people make.
Methods to follow if your Moto G6 fell into the water
Whenever you want to restore your Moto G6 in working order, we highly recommend that you follow the steps below.
Don’t attempt to turn the Moto G6 back on after getting out the water
The first thing to perform when the Moto G6 has fallen into the water is to turn off the phone. Certainly, if it didn’t turn off, turn it off without doing any other tricks. In cases where it is already off, do not attempt to turn it back on for the moment. In cases where the Moto G6 is turned on and wet, you may make a short circuit and therefore toast the phone.
Remove detachable components
Once the Moto G6 is out of the water and turned off, it will have to be disassembled to the maximum. This means that it’ll be important to remove the shell, the SIM card, the SD card and the electric battery if possible. Once done, put all of these things to dry and proceed to the following step.
Aspire the water that is in your Moto G6
Utilizing a straw, you will need to suck up the water that is contained in your Moto G6. For doing it, you simply have to glue the straw over areas like buttons and vacuum. Once you believe you have aspired all the water from your Moto G6, you will be ready to start drying it.
Dry the Moto G6
The fourth step is to dry the phone. For this, we suggest you to put it in front of a ventilator several hours. Avoid using techniques that cause the phone to heat up or damage the phone. Once it is performed, we suggest you to leave the Moto G6 in rice for 24 or 48 hours. The rice will therefore absorb the wetness that remains in the Moto G6.
Reassemble the components and turn on the Moto G6
When you have completed the prior steps, your Moto G6 should be dry. So now you can make an attempt to turn on the Moto G6. If perhaps this doesn’t do the job, we suggest you to hang on a couple of days or to bring the Moto G6 to a repairshop.
What should not be done if the Moto G6 has fallen into the water
There are several points not to perform when your Moto G6 has fallen into the water. The first of all is to make an attempt to turn the phone back on just after. This can kill the Moto G6. Next, it is highly advised not to use a heat source to dry the Moto G6. Without a doubt, solutions which include oven or hair dryer heat the components and may deteriorate them. Finally, to get the water out of the phone, do not shake it. Certainly, it could additionally damage the Moto G6.
